e7ded7737a
Preliminary pass at converting connection system to use a more generic approach and support more devices and multiple devices at the same time.
Collin Kidder2016-03-19 21:40:21 -04:00
8a886ddcc9
More implementation of iso-tp interpreter. Mostly just defines.
Collin Kidder2016-03-14 21:57:43 -04:00
66675e47b3
Added an ISO-TP decoder. At the moment it tries to decode all frames and that leads to odd results.
Collin Kidder2016-03-06 20:44:25 -05:00
f6fe53163c
Added code to sync PC and GVRET timing so that frames sent from SavvyCAN line up properly in timestamp. Incremented version num.
Collin Kidder2016-02-28 19:50:56 -05:00
18bbd8632f
Changed UDS window to work more quickly and use the new rapid frame system.
Collin Kidder2016-02-28 16:56:39 -05:00
e2cedf2482
A small fix to make transmitted frame timestamps a bit more accurate but still not synced to capture device.
Collin Kidder2016-02-28 16:56:04 -05:00
4767a7349f
Added ability for sub windows to get frames much more rapidly than before. Decoupled SerialWorker from MainWindow a bit and refactored things.
Collin Kidder2016-02-28 16:10:55 -05:00
4ab63856ee
Remove reference to serialbus so code can be compiled on pre 5.6.0 QT again. There isn't any reason it has to be there (yet)
Collin Kidder2016-02-28 16:08:43 -05:00
d7a9557cb0
Merge branch 'WIP2' of github.com:collin80/SavvyCAN into WIP2
Collin Kidder2016-02-26 14:24:06 -05:00
403689c214
Small fix for potential crash bug in UDS scanner
Collin Kidder2016-02-26 14:16:23 -05:00
7f536928d7
More changes to UDS scanner to make it better able to find UDS nodes even if they don't quite match standard UDS conventions, Ability to start/stop UDS scan when it was running.
Collin Kidder2016-02-26 14:11:07 -05:00
6c143049c5
Attempts to debug an issue that causes files to load up with twice the number of actual frames.
Collin Kidder2016-01-28 20:56:26 -05:00
763b20136e
Fixed up the rest of the fuzzing window. It should be pretty complete and functional now.
Collin Kidder2016-01-28 19:54:52 -05:00
54045badeb
More implementation of fuzzing window - now it is possible to use the bitfield to select which bits to fuzz - random bit fuzzing works but seqential and sweep do not yet.
Collin Kidder2016-01-27 22:07:17 -05:00
411b43146d
Upped version number, implemented an incomplete but working version of the fuzzing window.
Collin Kidder2016-01-27 20:26:12 -05:00
2b82e1dec4
Good God, OSX is annoying. Renamed "Configure Port" to "Set Port" so that stupid OSX won't grab it and pretend it's the main preference system again... This should fix the issue where the connection dialog replaces the preferences dialog.
Collin Kidder2016-01-26 20:05:23 -05:00
f3cccc2231
Updated version, added two new windows (not done), fixed more issues with how connecting works - it now also stores the last connection so you can resume using it the next time the program is run.
Collin Kidder2016-01-26 19:53:15 -05:00
427b2cf326
Fixed bugs in connect/disconnect and overwrite mode.
Collin Kidder2016-01-25 20:02:20 -05:00
c41815e628
Added ability to create new DBC files from the DBC file manager, hooked up ability to change associated bus for DBC files.
Collin Kidder2016-01-21 20:49:51 -05:00
a42d9532d7
Refactored code so that frame file loading/saving is all done through a unified interface. Updated file filters. Notched up version number.
Collin Kidder2016-01-21 20:11:35 -05:00
7a28951206
Fix up loading and saving of CAN-DO format to be more correct
Collin Kidder2016-01-21 19:42:10 -05:00
18294c7712
Change default save/load format to native GVRET log format. This format has the most information and is really the best option. Fixed up lack of ability to save IXXAT and CANDO filtered.
Collin Kidder2016-01-21 19:15:12 -05:00
b328e08096
Added IXXAT and CAN-DO formats for loading and saving. Incremented version number.
Collin Kidder2016-01-19 21:40:02 -05:00
00aa9c6c14
Fix an issue that caused DBC interpretation to not work right
Collin Kidder2016-01-17 17:17:44 -05:00
3ef905b68a
Added a file manager and hooked it up. It is now possible to load and edit multiple DBC files.
Collin Kidder2016-01-17 17:09:47 -05:00
cd5f851f35
Major mondification to how DBC files are handled in-program. Now it is much more object oriented and encapsulated. The biggest addition is that it is now possible to support multiple DBC files being loaded at once with each file associated to one or both buses. Note that currently the program still does not support multiple DBC files but the groundwork is there.
Collin Kidder2016-01-17 13:30:42 -05:00
d831f985f5
Switched to a safer way to deal with signals in the graphing window. Previously it was possible to crash the program by graphing with a signal and then loading a different DBC file. No more will that happen. Also, there is an error message if you load a graph definition file that relies on a DBC file that you don't have loaded.
Collin Kidder2016-01-12 22:35:19 -05:00
c8666b4147
Added ability to load and save graph definitions for signal based graphs. Implemented code to support appending to signal based graphs.
Collin Kidder2016-01-11 22:14:42 -05:00
cdd4f23609
First pass of adding direct DBC signal support to the graphing window. It mostly works now but there are several little pieces still to do.
Collin Kidder2016-01-11 20:45:30 -05:00
62e168905a
Properly hooked up multiplexed signals. They now show up correctly when "Interpret Frames" is selected on the main screen. Fixed some bugs related to the new DBC code.
Collin Kidder2016-01-10 21:54:33 -05:00
81e97e8803
Added ability for candatagrid to show the currently used bits in gray. Used in signal editor to help make it easier to know what bits are used. Added single and double precision float code where appropriate. They weren't supported at all before. But, that code isn't really tested yet. Added support for multiplexed signals. Most all the code for the UI is done and some of the backend but it isn't hooked into the actual signal processing code just yet. Updated program version number.
Collin Kidder2016-01-10 20:34:32 -05:00
1e04e5fb31
Added the ability to save all frame details within the details screen to file.
Collin Kidder2016-01-03 18:37:58 -05:00
e2903c9058
Removed singlewire mode from settings screen because it is on connection screen now. Added ability to show binary view of a byte. Added changed bits to each message ID in the frame details view.
Collin Kidder2016-01-03 18:08:10 -05:00
ff130814d9
Fixed the regular expression matching for DBC loading to be more tolerant of minor syntax differences.
Collin Kidder2016-01-01 20:33:22 -05:00
5facfe72aa
Fixed a nasty bug that could cause the whole program to crash when changing ID filters. Made the new connection screen update to show the set baud rates. Added the ability to set Single Wire mode on the connection window but it actually doesn't work yet.
Collin Kidder2015-12-28 18:51:07 -05:00
a37dbe33aa
FIx up some merge problems that slipped through the last commit. I should be slapped for that.
Collin Kidder2015-12-20 21:41:38 -05:00
990f034936
More implementation of range mode. It works reasonably well now.
Collin Kidder2015-12-08 20:37:39 -05:00
72f07f304f
Addition of the range state window (it sort of works now too!), refactoring of some DBC code, fixed some DBC calcs, fixed a bug in the frame playback window, incremented version number to show that a lot has been done.
Collin Kidder2015-12-07 21:47:41 -05:00
1e46af88f1
Updated readme to explain the third-party dependencies.
Collin Kidder2015-12-03 14:36:33 -05:00
cc0f1733b1
Switched script source code view to a QScintilla based view.
Collin Kidder2015-12-02 21:56:06 -05:00
0d7490a423
Added ability to save/restore scripting window size and location
Collin Kidder2015-12-02 20:12:54 -05:00
d324177a7b
Got frame reception and sending working (preliminarily)
Collin Kidder2015-12-02 19:50:26 -05:00
c2e5df6087
Bug fixes, turn some connections into QT5 syntax, more implementation of scripting interface.
Collin Kidder2015-12-02 15:53:26 -05:00
f6b5db9617
Added the ability to track which direction frames are coming from (from us or to us), import that detail from file formats that support it, save it to file formats that support it. Also some bug fixes.
Collin Kidder2015-12-01 20:25:52 -05:00
0ff076de3a
Fixed up ability to send frames while not connected and to show frames that were sent within the same window as received frames. Added a new scripting window that can be used to create scripts that send and receive messages at runtime - not done but sort of working.
Collin Kidder2015-11-30 20:35:08 -05:00
3fb702e22e
Add sent frames to the frames lists as well. Previously anything sent by the program would not show up and this leads to various issues.
Collin Kidder2015-11-30 19:38:29 -05:00
f7bd31ab53
Update version number - forgot in last commit
Collin Kidder2015-11-23 22:05:27 -05:00
dfc3ced69d
Added support for loading/saving trace files. Presumably this format is from Vector in some fashion.
Collin Kidder2015-11-23 21:52:28 -05:00
2379deb2fc
Remove a few screens that either aren't done or aren't yet for public consumption. Use the WIP branch if you want those things to still exist.
Collin Kidder2015-11-23 18:51:42 -05:00
70ebfc19c7
Fixed a precision bug that caused signed 32 bit integers to not work properly.
Collin Kidder2015-11-22 11:33:58 -05:00
1d89fe576e
Fix up some faulty variable definitions and clarify others.
Collin Kidder2015-11-22 10:27:17 -05:00
2916fb92eb
Added more control options to graphing window, updated version number
Collin Kidder2015-10-29 22:32:27 -04:00
3ed0ac4880
Added bitwise not and modulus division to the list of operations you can do with modifiers in the custom frame window
Collin Kidder2015-10-13 21:28:10 -04:00
79fc69040d
Wrote documentation for the custom sender window. Added a graph for this new documentation.
Collin Kidder2015-09-27 23:22:33 -04:00
37df633264
Added to the documentation for the project. There are a bunch of pictures to be used in the documentation. An initial draft of the docs for the main screen has been completed.
Collin Kidder2015-09-26 22:30:21 -04:00
d94f56c51c
Added skeleton files for help documentation
Collin Kidder2015-09-24 22:30:33 -04:00
d0cf69f54f
Added several example files. Every frame capture format has an example. All examples are exactly the same data. It is a small capture from a Tesla Model S. Also, there is a sample DBC file which is actually a real DBC file that has data on the EVTV BMS and Coda UQM motor controller.
Collin Kidder2015-09-24 19:34:43 -04:00
a6695a0bf7
Fixed a precision bug that caused signed 32 bit integers to not work properly.
Collin Kidder2015-11-22 11:33:58 -05:00
1300ca6457
Fix up some faulty variable definitions and clarify others.
Collin Kidder2015-11-22 10:27:17 -05:00
0d5c370bc4
Added more control options to graphing window, updated version number
Collin Kidder2015-10-29 22:32:27 -04:00
4dc8c5b434
Initial commit where connection window is active and it is possible to connect to GVRET but this time through the connection window and the menu option "Connect".
Collin Kidder2015-10-18 15:34:40 -04:00
49f2525320
Add files for a new window for connections (allows for different types of connections and also makes auto refreshing the port list easier)
Collin Kidder2015-10-13 21:38:36 -04:00
918ede4e10
Added bitwise not and modulus division to the list of operations you can do with modifiers in the custom frame window
Collin Kidder2015-10-13 21:28:10 -04:00
3a8d5c16d0
Wrote documentation for the custom sender window. Added a graph for this new documentation.
Collin Kidder2015-09-27 23:22:33 -04:00
76077e48b0
Added to the documentation for the project. There are a bunch of pictures to be used in the documentation. An initial draft of the docs for the main screen has been completed.
Collin Kidder2015-09-26 22:30:21 -04:00
5618228692
Added skeleton files for help documentation
Collin Kidder2015-09-24 22:30:33 -04:00
d29dc9c24e
Added several example files. Every frame capture format has an example. All examples are exactly the same data. It is a small capture from a Tesla Model S. Also, there is a sample DBC file which is actually a real DBC file that has data on the EVTV BMS and Coda UQM motor controller.
Collin Kidder2015-09-24 19:34:43 -04:00
c981659590
Fixed errors in spreadsheet calcs and added a header
Collin Kidder2015-09-17 20:14:03 -04:00
705a7802d7
More implementation of the spreadsheet output.
Collin Kidder2015-09-17 19:27:38 -04:00
89ca64e301
Initial simple implemention of an idea to turn graphs into spreadsheets that are nicely formatted.
Collin Kidder2015-09-16 22:35:32 -04:00
97de959783
Fixed issues with phantom records when filtering the main frame display. Updated version number and required GVRET version since GVRET has had some important fixes recently.
Collin Kidder2015-09-14 20:47:05 -04:00
e0db7e83fd
Added a trigger ability to flowview. The playback will stop automatically if a trigger value is found. This allows for moving quickly through the data looking for a given value. Also change the hotkeys to R,T,Y because they aren't really needed for anything else on the form.
Collin Kidder2015-09-13 19:37:28 -04:00
Collin Kidder