Collin Kidder
c398856806
Small fix to make unconnected devices still show up properly in the connection window
2017-11-09 20:07:00 -05:00
Collin Kidder
545f258b8e
Make sent frames have a timestamp resolution of microseconds just like incoming frames. Previously sent frame
...
time stamps were rounded to the nearest millisecond.
Note, however, that this time stamp is when we first tried to send the frame to hardware,
not when the hardware sent the frame. That will probably be later on but there's no way
to know for sure if/when it will send the frame.
2017-11-08 21:20:17 -05:00
Collin Kidder
3bf19fdbc4
Moved a lot of the frame playback window functionality to a new class. This allows the functionality to be run
...
on a separate thread. The performance is a lot better and "use original timing" is now reasonably accurate.
2017-11-08 20:38:19 -05:00
Collin Kidder
bc4e823d3d
CAN Connection Window mostly done now.
2017-10-23 19:45:08 -04:00
Collin Kidder
0519e2d2c9
More work on supporting swcan - it's there now! Untested as of yet.
2017-10-22 20:42:02 -04:00
Collin Kidder
ac976643f4
Further work to get more buses working on the GVRET/M2RET devices
2017-10-22 20:15:18 -04:00
Collin Kidder
383ee8fe19
Big changes to connection window to make it more intuitive. Also
...
brings window closer to supporting M2RET devices better.
2017-10-18 21:48:13 -04:00
Andre Hartmann
ee4a218a67
SocketCan: Correctly support CAN frames with extended identifier
2017-09-02 10:09:42 +02:00
Andre Hartmann
3f8e2bb5c3
SocketCan: Allow receiving CAN frames with empty data field
...
A CAN frame with data size zero is absolutely legal.
2017-09-02 10:09:42 +02:00
Andre Hartmann
74c7b0afc1
SocketCan: Fix compiler warning about missing break
2017-09-02 10:09:35 +02:00
Andre Hartmann
c835f36fe9
SocketCan: Fix warnings about old style casts and sign changes
2017-09-02 10:08:01 +02:00
Collin Kidder
162d79fbe9
Lots of large changes to scripting support, changes to the way
...
filtering works with ISOTP/UDS messages, updated version number.
2017-08-22 21:42:30 -04:00
Collin Kidder
7c3fef54f9
Changed the way adding/removing targetted frames works. It's simpler
...
now.
2017-08-22 20:03:06 -04:00
Collin Kidder
a109b7b22c
Made connection window store window size/position. Tweaked teardown
...
code.
2017-08-21 20:29:08 -04:00
Collin Kidder
670fd56869
Comment out some qDebug messages because they caused too much traffic
...
and weren't really that useful in general
2017-08-17 20:09:22 -04:00
Collin Kidder
8830950f85
Addition of "System Time" mode where frames are timestamped by
...
absolute time from the PC clock.
2017-07-09 16:54:26 -04:00
Collin Kidder
439ac4fcc4
Update to V169 - Now compiles under QT 5.9 (LTS). Fixed some warnings,
...
switched to using system QTScintilla library on Linux. This prevents
you from needing to compile it yourself, added preliminary support for
three buses with a GVRET device (for Macchina M2 boards)
2017-07-06 21:30:55 -04:00
Collin Kidder
4cf2dd1435
Merge pull request #82 from AgnosticPope/master
...
Fix Compile/build on Ubuntu 14.04
2017-07-06 21:02:56 -04:00
Collin Kidder
3d0b85c758
Remove superfluous file, fix compile bug
2017-05-22 19:47:06 -04:00
Collin Kidder
5ee32f5864
Merge remote-tracking branch 'origin/master'
...
# Conflicts:
# connections/canconnection.cpp
2017-05-21 20:21:40 -04:00
Collin Kidder
ea52b4c512
Fixes for OSX
2017-05-21 20:18:59 -04:00
Collin Kidder
e3bb44f61b
More implementation of UDS code, bug fixes to UDS, addition of
...
progress bar for UDS
2017-05-21 19:44:26 -04:00
Collin Kidder
1ccb9bac2e
Major refactoring of ISOTP and UDS code to be more generic and have
...
better functionality.
2017-05-15 22:38:59 -04:00
Collin Kidder
d38b94120d
Fixes to allow for rapid frame updating in screens that need it, more
...
implementation of UDS scanner (and fixes to make it work with current
code base)
2017-05-11 21:42:12 -04:00
James Willis
ed80653bd4
Fix compile
2017-04-25 19:52:23 -07:00
Collin Kidder
e2811af479
Added a serial console to the connection window which can be used to
...
figure out what is going on with a connected device. Currently really
only useful for GVRET style devices.
2017-04-11 21:09:29 -04:00
Collin Kidder
b00984c266
Change the reported number of connected buses to be the number of actually connected buses not the total number of buses
2017-01-05 19:04:32 -05:00
Collin Kidder
5caef500a7
Fix crash bug when trying to send to a socketcan device that wasn't properly opened.
2017-01-05 18:37:04 -05:00
Collin Kidder
b18c30724e
A bit better debugging messages, fix up filtering for firmware updater
2017-01-02 17:25:02 -05:00
Collin Kidder
2758fa8a09
Removed a few more warnings, switched the way CAN callbacks work.
2016-12-30 14:24:17 -05:00
Collin Kidder
7222870b1e
Many little fixes to clean up warnings and bugs.
2016-12-29 20:50:02 -05:00
Collin Kidder
beea680106
Changed the way the filter system works in the CAN connection objects - now used only for sending frames immediately to relevant objects. Tested to work in firmware updater. Currently broken elsewhere. Also switched main frame update interval from 4 times per second to 8 to make things smoother.
2016-12-29 19:13:51 -05:00
Collin Kidder
96523cc082
Disable controls that don't do anything for socketcan
2016-12-21 20:19:23 -05:00
Collin Kidder
9cceb4404d
Remove some older junk code, add ability for main screen to show the number of connected buses
2016-12-20 20:33:11 -05:00
Collin Kidder
4d4eabad7a
Correction for GVRET time sync. Seems to be proper now (hopefully)
2016-12-19 21:34:22 -05:00
Collin Kidder
cdfb7661a1
Bug fixes in connection code, some commented out debugging statements used only for specific debugging
2016-12-19 20:46:59 -05:00
Collin Kidder
0f3f9e0fad
Unified time base now so both GVRET and Socketcan devices yield timestamps in microseconds since the program started or clear was pressed, fixed frames per second display, fixed timestamps for sent frames
2016-12-18 21:40:56 -05:00
Collin Kidder
b7a1afcd8f
Further source file restructuring
2016-12-11 21:36:25 -05:00
Collin Kidder
2cfacc6519
A few small fixes to connection window
2016-12-08 20:21:24 -05:00
Collin Kidder
b4c8aa49db
First pass at turning on functionality to allow frame sending from the new connection system.
...
The fuzzing window has been modified to use the new system. This validates that it mostly works now.
More screens will be modified to work soon.
2016-08-09 20:03:57 -04:00
canpadawan
9295510168
change refresh rate to 250ms
2016-07-07 16:48:14 +02:00
canpadawan
e402ea76fa
add CANConManager
2016-06-29 11:55:58 +02:00
canpadawan
db7ad42199
add << and >> for serialization
2016-06-29 11:54:36 +02:00
canpadawan
d4f0bd4b19
add frame write support
2016-06-24 17:26:30 +02:00
canpadawan
1a195fe360
add filters & callback support
2016-06-20 17:34:30 +02:00
canpadawan
89ad77eab9
removed uneeded queue resizing
2016-06-16 15:52:47 +02:00
canpadawan
893aab5600
renamed socketcan class
2016-06-16 13:59:06 +02:00
canpadawan
d1c5642668
more thread abstraction
2016-06-16 13:25:56 +02:00
canpadawan
c3c6ff3acd
removed mutex
2016-06-15 18:38:43 +02:00
canpadawan
6d20a0665d
add a factory for the different connection types
2016-06-15 18:25:58 +02:00
Collin Kidder