Merge pull request #86 from adamvoss/readme

Improve formatting of the README

README.md

@@ -8,8 +8,7 @@ capturing of canbus frames.
 
 Really requires at a resolution of at least 1024x768. Fully multi-monitor capable.
 
-You are highly recommended to use the CANDue board from EVTV:
-(http://store.evtv.me/proddetail.php?prod=ArduinoDueCANBUS&cat=23)
+You are highly recommended to use the [CANDue board from EVTV](http://store.evtv.me/proddetail.php?prod=ArduinoDueCANBUS&cat=23).
 
 The CANDue board must be running the GVRET firmware which can also be found
 within the collin80 repos.
@@ -23,27 +22,19 @@ It should, however, be noted that use of a capture device is not required to mak
 of this program. It can load and save in several formats:
 
 1. BusMaster log file
-
 2. Microchip log file
-
 3. CRTD format (OVMS log file format from Mark Webb-Johnson)
-
 4. GVRET native format
-
 5. Generic CSV file (ID,D0 D1 D2 D3 D4 D5 D6 D7)
-
 6. Vector Trace files
-
 7. IXXAT Minilog files
-
 8. CAN-DO Logs
-
 9. Vehicle Spy log files
-
 10. CANDump / Kayak (Read only)
-
 11. PCAN Viewer (Read Only)
 
+## Dependencies
+
 Requires QScintilla library available at:
 
 https://www.riverbankcomputing.com/software/qscintilla/download
@@ -57,23 +48,26 @@ However, this source code is integrated into the source for SavvyCAN and one isn
 This project requires 5.6.0 or higher because of a dependency on QSerialBus which is an optional download
 with QT 5.6 (so, be sure to select it)
 
-##Instructions for compiling:
+## Instructions for compiling:
 
 Download the newest stable version of Qt directly from qt.io (You need 5.6.x or newer)
 
 download and extract QScintilla (see above for link), assume it is extracted in QScintilla-gpl-2.9.1
 
+```
 cd ~/QScintilla-gpl-2.9.1/Qt4Qt5
+```
 
 You will need to either put your copy of QT into your path or specify the path to qmake directly
 
+```
 ~/Qt/5.7/gcc_64/bin/qmake qscintilla.pro
 
 make
 
 sudo make install
 
-Optionally remove ~/QScintilla-gpl-2.9.1
+# Optionally remove ~/QScintilla-gpl-2.9.1
 
 cd ~
 
@@ -84,20 +78,25 @@ cd SavvyCAN
 ~/Qt/5.7/gcc_64/bin/qmake
 
 make
+```
 
 Now run SavvyCAN
 
+```
 ./SavvyCAN
+```
 
-##What to do if your compile failed?
+## What to do if your compile failed?
 
 The very first thing to do is try:
 
+```
 qmake
 
 make clean
 
 make
+```
 
 Did that fix it? Great! If not, see if QT seems to be complaining about not finding the QScintilla header files. If that's the case then you are probably not using the same QT version as QScintilla was compiled against. It's easy to run the wrong qmake and have this happen. Double check that you've already compiled and installed QScintilla and that you've used the proper qmake version.