BisectWindow Bisector Window Splitting Strategy: ID Range TO Frame Number Percentage Bus Number Save Which Side: Lower Section Upper Section Number of Frames in Main List: 0 Saved Frames after split: Calculate Split Save split frames to a new file Replace main list with split frames Successfully saved file Error while attempting to save. CANBridgeWindow CAN Bridger Side 1 Enable forwarding IDs to forward to side 2 Side 2 IDs to forward to side 1 CANConnectionModel Type Subtype Port Buses Status CANDataGrid Form CANFrameModel Rx Tx Time Delta Timestamp ID Ext RTR Cnt Dir Bus Len ASCII Data ConnectionWindow Connection Settings Disconnect Selected Device Reset Selected Device Bus Details: Speed: Listen Only: Enable Bus: Save Bus Settings Enable CAN FD: CAN FD Data Rate Connected Devices: Add New Device Connection Enable Console Device Console: Send: Send Hex Send Text Clear DBCComparatorWindow DBC Comparator Side 1 TextLabel Load New File Side 2 Load A File Save Details to File DBC Files (*.dbc *.DBC) Text File (*.txt) DBCHandler DBC File (*.dbc) DBCLoadSaveWindow DBC File Manager Create new DBC Load Remove Move Up Save Edit Move Down DBC File (*.dbc) Tesla JSON File (*.json) Secret CSV Signal Defs (*.csv) DBCMainEditor DBC Editing Window New Node New Message New Signal Delete Find: Search Search Results: 0 of 0 Next Previous Delete currently selected message Rebase all messages Rebase all messages in node Duplicate node Duplicate node and messages DBCMessageEditor Message Editor Frame ID: Message Name: Frame Length: Text Color: Background Color: Comments: Sending Node: Set Sample Colored Output: DBCNodeDuplicateEditor Duplicate Node New Node Name: Current Base ID: New Base ID: Cancel DBCNodeEditor Node Editor Node Name: Comments: DBCNodeRebaseEditor Rebase All Node Messages Node Name: Current Base ID: New Base ID: Rebase All Messages in Node Cancel DBCSignalEditor Signal Editor Name: Bit Length: Byte Order LSB First (Little Endian) Type: Scale: Bias: Min Value: Max Value: Units Name: Receiving Node: Multiplexing None Multiplexed Multiplexor Extended Multiplex value Multiplex Parent Comment: Single values has to be separated by semicolons and the value ranges by hypens (e.g.: 1;2;5-7) Value Table: Error The multiplex values field contains errors: %1 Delete currently selected value DiscreteStateWindow Single/Multi State WIndow Candidate Matches: Number of States: Realtime From logged data Toggle Frequency (Seconds) Iterations WAIT Min Bits Max Bits IDs to Scan All None Go for it FileComparatorWindow File Comparator SIDE 1 Single file to compare to side 2: TextLabel Load New File Side 2 One or more files to compare with the single file on side1: Load A File Clear Frames Show only data unique to Side 1 Save Details to File Text File (*.txt) FirmwareUploaderWindow Firmware Updater Loaded File: Load File Device Token: CAN Bus: Base Address: X of Y bytes Start Upload Raw firmware binary (*.bin) FlowViewWindow Flow View Playback Control Playback Speed: Loop Playback Current Frame: X of Y Live Mode (No Playback) Synchronize windows Graph by timestamp Auto Reference Reference Values (Hex) 0 1 2 3 4 5 6 7 Current Values (Hex) Data Seek Values -1 Chart range 50 Timeline: Frame IDs Found: Save image to file PDF Files (*.pdf) PNG Files (*.png) JPEG Files (*.jpg) of FrameFileIO GVRET Logs (*.csv *.CSV) CRTD Logs (*.crt *.crtd *.CRT *.CRTD) Generic ID/Data CSV (*.csv *.CSV) BusMaster Log (*.log *.LOG) Microchip Log (*.can *.CAN *.log *.LOG) Vector Trace Files (*.trace *.TRACE) IXXAT MiniLog (*.csv *.CSV) CAN-DO Log (*.can *.avc *.evc *.qcc *.CAN *.AVC *.EVC *.QCC) Vehicle Spy (*.csv *.CSV) Candump/Kayak (*.log) Cabana Log (*.csv *.CSV) CANalyzer Ascii Log (*.asc *.ASC) CARBUS Analyzer (*.trc *.TRC) Autodetect File Type (*.*) Vector trace files (*.trace *.TRACE) CAN-DO Log (*.avc *.can *.evc *.qcc *.AVC *.CAN *.EVC *.QCC) Candump/Kayak (*.log *.LOG) CANDump Lawicel (*.txt *.TXT *.LOG *.log) PCAN Viewer (*.trc *.TRC) Kvaser Log Decimal (*.txt *.TXT) Kvaser Log Hex (*.txt *.TXT) CANalyzer Binary Log Files (*.blf *.BLF) CARBUS Analyzer Trace Files (*.trc *.TRC) CANHacker Trace Files (*.trc *.TRC) CANOpen Magic (*.csv *.CSV) Tesla Autopilot Snapshot (*.CAN *.can) CLX000 (*.txt *.TXT) CANServer Binary Log (*.log *.LOG) Wireshark (*.pcap *.PCAP *.pcapng *.PCAPNG) Wireshark SocketCAN (*.pcap *.PCAP CXX GVRET-PC Reverse Engineering Tool Output V FrameInfoWindow Detailed Frame Information Frame IDs: Unique IDs Details: Save details to file Interval Histogram Bytes Graph unique ids) J1939 decoding Broadcast Frame Destination ID: Destination ID: Global (ALL) Priority: SRC: EDP: DP: PGN: PF: PS: GMLAN 29bit decoding Priority bits: Arbitration Id: Sender Id: # of frames: Data Length: to Average inter-frame interval: Minimum inter-frame interval: Maximum inter-frame interval: Inter-frame interval variation: Interval standard deviation: Minimum range to fit 90% of inter-frame intervals: Data Byte Changed bits: 0x Range: Histogram Bitfield Histogram Bitchange Heatmap Text File (*.txt) FramePlaybackWindow Playback Use original frame timing from captured frames Wait for traffic before starting playback Playback speed (ms): Burst Rate: Current Playback Item: TextLabel Current frame: x of y Loop Sequence Send to CANBus <html><head/><body><p>Playback Sequence:</p></body></html> Load File Load Captured Data Delete Selected ID Filtering: Select all IDs Deselect all IDs Load Filters Save Filters All From File Save filter definition to file Load filter definition from file Filter list (*.ftl) Filter List (*.ftl) of FrameSenderWindow Frame Sender Enable All Disable All Clear Grid Load to Grid Save Grid Frame Sender Definition (*.fsd) FuzzingWindow Fuzzing Window Interframe Timing (ms) Number of data bytes Burst Rate Bus or Buses to Send On ID Scanning Seqential Random ID Selection Range of IDs Filter List Bit Scanning Sequential Sweep IDs Start ID: End ID: All None Byte Values (Always in hexadecimal) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 White = Bit always 0, Green = Fuzz Bit, Black = Bit always set, Gray = Past end of data bytes All High All Low All Auto Start Fuzzing # of sent frames: GraphingWindow Data Graphing Move to top left Move to top center Move to top right Move to bottom right Move to bottom left Save graph image to file Save graph definitions to file Load graph definitions from file Save spreadsheet of data Follow end of graph Add new graph Edit selected graph Remove selected graph Remove all graphs Reset View Rescale to data Zoom In Zoom Out PDF Files (*.pdf) PNG Files (*.png) JPEG Files (*.jpg) Spreadsheet (*.csv) Graph definition (*.gdf) HelpWindow SavvyCAN Help ISOTP_InterpreterWindow ISO-TP Decoder Interpreted Messages Overview Interpret Previously Captured Frames Clear Messages List Save List Show incomplete and/or corrupted messages Use extended addressing Data Details of Selected Message IDs to Decode All None Text File (*.txt) Raw Payload: MainSettingsDialog Main Settings Main Form Settings: Autoscroll main frame window by default Maximum data bytes per line General Settings: Save/Restore window positions and sizes Save/Restore CAN bus connections Display values as hexadecimal Require validation of GVRET connection Use filtered frames in sub-windows OpenGL Accelerated AntiAliased Graphing CAN Frame Pre-allocation Size Time Keeping Seconds/Milli/Micro are dongle based Seconds Microseconds Milliseconds System Clock Time Format String: Use absolute time in decoded CSV output Font Use fixed-width font in tables Size Flowview Settings: Use timestamp mode by default Set Auto Reference by default Hexadecimal Graph Y Axis Playback Window Settings: Loop by default Default playback speed (ms) Default Sending Bus DBC Settings Label DBC messages by default Ignore DBC message colors File Info and Comparator Settings: Auto expand all nodes MQTT Remote CAN Settings: Host: Port: User Name: Password Some settings will not take effect until the application is restarted None 0 1 All From File MainWindow SavvyCAN Remote Connection Active: Total Frames Captured: Frames Per Second: Suspend Capturing Normalize Frame Timing Clear Frames Keep Filters When Clearing Auto Scroll Window Overwrite Mode Interpret Frames Expand All Rows Collapse All Rows Bus Filtering: Frame Filtering: All None RE Tools Send Frames File Connection Playback Custom Flow View Fuzzy Scope New Graphing Window Load Log File Ctrl+O Save Log File Frame Data Analysis Load DBC File Edit Messages/Signals Save DBC File Save Decoded Frames Exit Application File Comparison Preferences Save Filtered Log File Load Filter Definition Save Filter Definition Firmware Uploader Open Connection Window Connect Scripting Interface Range State Single/Multi State DBC File Manager Fuzzing UDS Scanner ISO-TP Decoder Sniffer Firmware Update MotorControlConfig Capture Bisector Signal Viewer Start Continuous Logging Temporal Graph DBC Comparison Save Decoded Frames CSV CAN Bridge Connected to 0 buses Press F1 on any screen for help Add to a new graphing window Add to latest graphing window Cease Continuous Logging Filter list (*.ftl) Filter List (*.ftl) Text File (*.txt *.TXT) CSV File (*.csv *.CSV) Year Month Day Hour Minute Second Ms Time ID Bus DataLen Time: ID: Ext Std Bus: Data Bytes: Connected to buses No packets loaded No file loaded MotorControllerConfigWindow Controller Configuration Load Definition File Refresh Save RMS Definition File (*.txt *.TXT) NewConnectionDialog New Connection Connection Type socketcand (SocketCAN over Ethernet) QT SerialBus Devices (SocketCAN, PeakCAN, etc) MQTT Connection Serial Connection (GVRET) Network connection (GVRET) LAWICEL / SLCAN Serial CANserver CANlogserver SerialBus Device Type: Serial Port: Serial Port Speed: CAN Bus Speed: CAN-FD CAN-FD data rate Create New Connection NewGraphDialog Graph Settings <html><head/><body><p>Name:</p></body></html> ID: Start Bit: Graph a DBC Signal: Node: Message: Signal: Copy Signal Parameters Bit Len: Little Endian (LSB First) Signed: Mask: Bias: Scale Stride Associated Bus -1 Only Points Point Style Line Thickness Line Color CHANGE Fill Color Add this graph QObject The %1 part contains more than one '-' sign Unable to parse the %1 part to integer RangeStateWindow Range State Window Candidate Signals: Graphical Representation of Selected Signal: Sensitivity Min Signal Size: Max Signal Size: Granularity: Signal Mode: Signed Mode: ID Filter: All None Recalculate Candidate Signals Big Endian Little Endian Try Both Signed Value Unsigned Value ScriptingWindow Scripting Interface Public Variables Loaded Scripts &New &Del &Load Script Editing Window &Save Sa&ve As &Revert R&eload Re&compile Log Window &Auto Scroll Log Window Clear Log &Window Save L&og Javascript File (*.js) Log File (*.log) SignalViewerWindow Signal Viewer Remove Selected Signal Node Message Signal Add To Viewer Save View Load View Append to View Clear View SignalViewer definition (*.sdf) TemporalGraphWindow Temporal Graph TriggerDialog Trigger Builder Add New Delete Bus Msg ID Signal MS Delay Max Count Signal Value Save And Update UDSScanWindow UDS Scanner Scans To Run Add Delete Load Save Starting ID 0x Ending ID Show "No Reply" Allow adaptive reply offset Bus to scan Maximum reply delay (ms) Reply Offset: Scan Type: Run test in session type: Subfunct Len: Lower Bound: Upper Bound: Increment Lower Service: Upper Service: Results Run All Scans Run Selected Scan Save Scan Results UDS Test Specification (*.uds *.UDS) Text File (*.txt) snifferWindow Sniffer Notch Unnotch Mute notched bits Notch Interval ms Expire Interval Never Expire IDs Fade inactive bytes View Bits Filters: All None