diff --git a/SavvyCAN.desktop b/SavvyCAN.desktop
index 076ee6a..76585ed 100644
--- a/SavvyCAN.desktop
+++ b/SavvyCAN.desktop
@@ -1,11 +1,15 @@
[Desktop Entry]
Type=Application
Name=SavvyCAN
+Name[pt_BR]=SavvyCAN
GenericName=CANBus reverse engineering tool
+GenericName[pt_BR]=Ferramenta Rede CAN de engenharia reversa
Comment=Facilitates reverse engineering of canbus captures
+Comment[pt_BR]=Facilitar engenharia reversa de capturas de Rede CAN
Exec=SavvyCAN
Icon=SavvyCAN
Terminal=false
Categories=Development;Electronics;IDE;
MimeType=text/x-application;
Keywords=embedded electronics;electronics;canbus;reverse engineering;
+Keywords[pt_BR]=eletronica embarcada;eletronicos;canbus;engenharia reversa;
diff --git a/translations/pt_BR.qph b/translations/pt_BR.qph
new file mode 100644
index 0000000..cb6f173
--- /dev/null
+++ b/translations/pt_BR.qph
@@ -0,0 +1,47 @@
+
+
+
+ New
+ Novo
+
+
+ Save
+ Salvar
+
+
+ Cancel
+ Cancelar
+
+
+ Connect
+ Conectar
+
+
+ Disconnect
+ Desconectar
+
+
+ Yes
+ Sim
+
+
+ No
+ Não
+
+
+ Bus
+ Barramento
+
+
+ Frame
+ Frame
+
+
+ Frames
+ Frames
+
+
+ Scan
+ Varredura
+
+
diff --git a/translations/savvycan_en.ts b/translations/savvycan_en.ts
new file mode 100644
index 0000000..7129952
--- /dev/null
+++ b/translations/savvycan_en.ts
@@ -0,0 +1,4158 @@
+
+
+
+
+ BisectWindow
+
+
+
+ Bisector Window
+
+
+
+
+
+ Splitting Strategy:
+
+
+
+
+
+ ID Range
+
+
+
+
+
+ TO
+
+
+
+
+
+ Frame Number
+
+
+
+
+
+ Percentage
+
+
+
+
+
+ Bus Number
+
+
+
+
+
+ Save Which Side:
+
+
+
+
+
+ Lower Section
+
+
+
+
+
+ Upper Section
+
+
+
+
+
+ Number of Frames in Main List:
+
+
+
+
+
+
+
+ 0
+
+
+
+
+
+ Saved Frames after split:
+
+
+
+
+
+ Calculate Split
+
+
+
+
+
+ Save split frames to a new file
+
+
+
+
+
+ Replace main list with split frames
+
+
+
+
+ Successfully saved file
+
+
+
+
+ Error while attempting to save.
+
+
+
+
+ CANBridgeWindow
+
+
+
+ CAN Bridger
+
+
+
+
+
+ Side 1
+
+
+
+
+
+
+
+ Enable forwarding
+
+
+
+
+
+ IDs to forward to side 2
+
+
+
+
+
+ Side 2
+
+
+
+
+
+ IDs to forward to side 1
+
+
+
+
+ CANConnectionModel
+
+
+ Type
+
+
+
+
+ Subtype
+
+
+
+
+ Port
+
+
+
+
+ Buses
+
+
+
+
+ Status
+
+
+
+
+ CANDataGrid
+
+
+
+ Form
+
+
+
+
+ CANFrameModel
+
+
+ Rx
+
+
+
+
+ Tx
+
+
+
+
+ Time Delta
+
+
+
+
+ Timestamp
+
+
+
+
+ ID
+
+
+
+
+ Ext
+
+
+
+
+ RTR
+
+
+
+
+ Cnt
+
+
+
+
+ Dir
+
+
+
+
+ Bus
+
+
+
+
+ Len
+
+
+
+
+ ASCII
+
+
+
+
+ Data
+
+
+
+
+ ConnectionWindow
+
+
+
+ Connection Settings
+
+
+
+
+
+ Disconnect Selected Device
+
+
+
+
+
+ Reset Selected Device
+
+
+
+
+
+ Bus Details:
+
+
+
+
+
+ Speed:
+
+
+
+
+
+ Listen Only:
+
+
+
+
+
+ Enable Bus:
+
+
+
+
+
+ Save Bus Settings
+
+
+
+
+
+ Enable CAN FD:
+
+
+
+
+
+ CAN FD Data Rate
+
+
+
+
+
+ Connected Devices:
+
+
+
+
+
+ Add New Device Connection
+
+
+
+
+
+ Enable Console
+
+
+
+
+
+ Device Console:
+
+
+
+
+
+ Send:
+
+
+
+
+
+ Send Hex
+
+
+
+
+
+ Send Text
+
+
+
+
+
+ Clear
+
+
+
+
+ DBCComparatorWindow
+
+
+
+ DBC Comparator
+
+
+
+
+
+ Side 1
+
+
+
+
+
+
+
+ TextLabel
+
+
+
+
+
+ Load New File
+
+
+
+
+
+ Side 2
+
+
+
+
+
+ Load A File
+
+
+
+
+
+ Save Details to File
+
+
+
+
+ DBC Files (*.dbc *.DBC)
+
+
+
+
+ Text File (*.txt)
+
+
+
+
+ DBCHandler
+
+
+
+ DBC File (*.dbc)
+
+
+
+
+ DBCLoadSaveWindow
+
+
+
+ DBC File Manager
+
+
+
+
+
+ Create new DBC
+
+
+
+
+
+ Load
+
+
+
+
+
+ Remove
+
+
+
+
+
+ Move Up
+
+
+
+
+
+ Save
+
+
+
+
+
+ Edit
+
+
+
+
+
+ Move Down
+
+
+
+
+ DBC File (*.dbc)
+
+
+
+
+ Tesla JSON File (*.json)
+
+
+
+
+ Secret CSV Signal Defs (*.csv)
+
+
+
+
+ DBCMainEditor
+
+
+
+ DBC Editing Window
+
+
+
+
+
+ New Node
+
+
+
+
+
+ New Message
+
+
+
+
+
+ New Signal
+
+
+
+
+
+ Delete
+
+
+
+
+
+ Find:
+
+
+
+
+
+ Search
+
+
+
+
+
+ Search Results: 0 of 0
+
+
+
+
+
+ Next
+
+
+
+
+
+ Previous
+
+
+
+
+ Delete currently selected message
+
+
+
+
+ Rebase all messages
+
+
+
+
+ Rebase all messages in node
+
+
+
+
+ Duplicate node
+
+
+
+
+ Duplicate node and messages
+
+
+
+
+ DBCMessageEditor
+
+
+
+ Message Editor
+
+
+
+
+
+ Frame ID:
+
+
+
+
+
+ Message Name:
+
+
+
+
+
+ Frame Length:
+
+
+
+
+
+ Text Color:
+
+
+
+
+
+ Background Color:
+
+
+
+
+
+ Comments:
+
+
+
+
+
+ Sending Node:
+
+
+
+
+
+
+
+ Set
+
+
+
+
+
+ Sample Colored Output:
+
+
+
+
+ DBCNodeDuplicateEditor
+
+
+
+
+
+ Duplicate Node
+
+
+
+
+
+ New Node Name:
+
+
+
+
+
+ Current Base ID:
+
+
+
+
+
+ New Base ID:
+
+
+
+
+
+ Cancel
+
+
+
+
+ DBCNodeEditor
+
+
+
+ Node Editor
+
+
+
+
+
+ Node Name:
+
+
+
+
+
+ Comments:
+
+
+
+
+ DBCNodeRebaseEditor
+
+
+
+ Rebase All Node Messages
+
+
+
+
+
+ Node Name:
+
+
+
+
+
+ Current Base ID:
+
+
+
+
+
+ New Base ID:
+
+
+
+
+
+ Rebase All Messages in Node
+
+
+
+
+
+ Cancel
+
+
+
+
+ DBCSignalEditor
+
+
+
+ Signal Editor
+
+
+
+
+
+ Name:
+
+
+
+
+
+ Bit Length:
+
+
+
+
+
+ Byte Order
+
+
+
+
+
+ LSB First (Little Endian)
+
+
+
+
+
+ Type:
+
+
+
+
+
+ Scale:
+
+
+
+
+
+ Bias:
+
+
+
+
+
+ Min Value:
+
+
+
+
+
+ Max Value:
+
+
+
+
+
+ Units Name:
+
+
+
+
+
+ Receiving Node:
+
+
+
+
+
+ Multiplexing
+
+
+
+
+
+ None
+
+
+
+
+
+ Multiplexed
+
+
+
+
+
+ Multiplexor
+
+
+
+
+
+ Extended
+
+
+
+
+
+ Multiplex value
+
+
+
+
+
+ Multiplex Parent
+
+
+
+
+
+ Comment:
+
+
+
+
+
+ Single values has to be separated by semicolons
+and the value ranges by hypens
+(e.g.: 1;2;5-7)
+
+
+
+
+
+ Value Table:
+
+
+
+
+ Error
+
+
+
+
+ The multiplex values field contains errors:
+%1
+
+
+
+
+ Delete currently selected value
+
+
+
+
+ DiscreteStateWindow
+
+
+
+ Single/Multi State WIndow
+
+
+
+
+
+ Candidate Matches:
+
+
+
+
+
+ Number of States:
+
+
+
+
+
+ Realtime
+
+
+
+
+
+ From logged data
+
+
+
+
+
+ Toggle Frequency (Seconds)
+
+
+
+
+
+ Iterations
+
+
+
+
+
+ WAIT
+
+
+
+
+
+ Min Bits
+
+
+
+
+
+ Max Bits
+
+
+
+
+
+ IDs to Scan
+
+
+
+
+
+ All
+
+
+
+
+
+ None
+
+
+
+
+
+ Go for it
+
+
+
+
+ FileComparatorWindow
+
+
+
+ File Comparator
+
+
+
+
+
+ SIDE 1
+
+
+
+
+
+ Single file to compare to side 2:
+
+
+
+
+
+
+
+ TextLabel
+
+
+
+
+
+ Load New File
+
+
+
+
+
+ Side 2
+
+
+
+
+
+ One or more files to compare with the single file on side1:
+
+
+
+
+
+ Load A File
+
+
+
+
+
+ Clear Frames
+
+
+
+
+
+ Show only data unique to Side 1
+
+
+
+
+
+ Save Details to File
+
+
+
+
+ Text File (*.txt)
+
+
+
+
+ FirmwareUploaderWindow
+
+
+
+ Firmware Updater
+
+
+
+
+
+ Loaded File:
+
+
+
+
+
+ Load File
+
+
+
+
+
+ Device Token:
+
+
+
+
+
+ CAN Bus:
+
+
+
+
+
+ Base Address:
+
+
+
+
+
+ X of Y bytes
+
+
+
+
+
+ Start Upload
+
+
+
+
+ Raw firmware binary (*.bin)
+
+
+
+
+ FlowViewWindow
+
+
+
+ Flow View
+
+
+
+
+
+ Playback Control
+
+
+
+
+
+ Playback Speed:
+
+
+
+
+
+ Loop Playback
+
+
+
+
+
+ Current Frame:
+
+
+
+
+
+ X of Y
+
+
+
+
+
+ Live Mode (No Playback)
+
+
+
+
+
+ Synchronize windows
+
+
+
+
+
+ Graph by timestamp
+
+
+
+
+
+ Auto Reference
+
+
+
+
+
+ Reference Values (Hex)
+
+
+
+
+
+
+
+
+
+
+
+ 0
+
+
+
+
+
+
+
+
+
+
+
+ 1
+
+
+
+
+
+
+
+
+
+
+
+ 2
+
+
+
+
+
+
+
+
+
+
+
+ 3
+
+
+
+
+
+
+
+
+
+
+
+ 4
+
+
+
+
+
+
+
+
+
+
+
+ 5
+
+
+
+
+
+
+
+
+
+
+
+ 6
+
+
+
+
+
+
+
+
+
+
+
+ 7
+
+
+
+
+
+ Current Values (Hex)
+
+
+
+
+
+ Data Seek Values
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ -1
+
+
+
+
+
+ Chart range
+
+
+
+
+
+ 50
+
+
+
+
+
+ Timeline:
+
+
+
+
+
+ Frame IDs Found:
+
+
+
+
+
+ Save image to file
+
+
+
+
+ PDF Files (*.pdf)
+
+
+
+
+
+ PNG Files (*.png)
+
+
+
+
+
+ JPEG Files (*.jpg)
+
+
+
+
+ of
+
+
+
+
+ FrameFileIO
+
+
+
+
+ GVRET Logs (*.csv *.CSV)
+
+
+
+
+
+ CRTD Logs (*.crt *.crtd *.CRT *.CRTD)
+
+
+
+
+
+ Generic ID/Data CSV (*.csv *.CSV)
+
+
+
+
+
+ BusMaster Log (*.log *.LOG)
+
+
+
+
+
+ Microchip Log (*.can *.CAN *.log *.LOG)
+
+
+
+
+ Vector Trace Files (*.trace *.TRACE)
+
+
+
+
+
+ IXXAT MiniLog (*.csv *.CSV)
+
+
+
+
+ CAN-DO Log (*.can *.avc *.evc *.qcc *.CAN *.AVC *.EVC *.QCC)
+
+
+
+
+
+ Vehicle Spy (*.csv *.CSV)
+
+
+
+
+ Candump/Kayak (*.log)
+
+
+
+
+
+ Cabana Log (*.csv *.CSV)
+
+
+
+
+
+ CANalyzer Ascii Log (*.asc *.ASC)
+
+
+
+
+ CARBUS Analyzer (*.trc *.TRC)
+
+
+
+
+ Autodetect File Type (*.*)
+
+
+
+
+ Vector trace files (*.trace *.TRACE)
+
+
+
+
+ CAN-DO Log (*.avc *.can *.evc *.qcc *.AVC *.CAN *.EVC *.QCC)
+
+
+
+
+ Candump/Kayak (*.log *.LOG)
+
+
+
+
+ CANDump Lawicel (*.txt *.TXT *.LOG *.log)
+
+
+
+
+ PCAN Viewer (*.trc *.TRC)
+
+
+
+
+ Kvaser Log Decimal (*.txt *.TXT)
+
+
+
+
+ Kvaser Log Hex (*.txt *.TXT)
+
+
+
+
+ CANalyzer Binary Log Files (*.blf *.BLF)
+
+
+
+
+ CARBUS Analyzer Trace Files (*.trc *.TRC)
+
+
+
+
+ CANHacker Trace Files (*.trc *.TRC)
+
+
+
+
+ CANOpen Magic (*.csv *.CSV)
+
+
+
+
+ Tesla Autopilot Snapshot (*.CAN *.can)
+
+
+
+
+ CLX000 (*.txt *.TXT)
+
+
+
+
+ CANServer Binary Log (*.log *.LOG)
+
+
+
+
+ Wireshark (*.pcap *.PCAP *.pcapng *.PCAPNG)
+
+
+
+
+ Wireshark SocketCAN (*.pcap *.PCAP
+
+
+
+
+ CXX GVRET-PC Reverse Engineering Tool Output V
+
+
+
+
+ FrameInfoWindow
+
+
+
+ Detailed Frame Information
+
+
+
+
+
+ Frame IDs:
+
+
+
+
+
+ Unique IDs
+
+
+
+
+
+ Details:
+
+
+
+
+
+ Save details to file
+
+
+
+
+
+ Interval Histogram
+
+
+
+
+
+ Bytes Graph
+
+
+
+
+
+ unique ids)
+
+
+
+
+ J1939 decoding
+
+
+
+
+ Broadcast Frame
+
+
+
+
+ Destination ID:
+
+
+
+
+ Destination ID: Global (ALL)
+
+
+
+
+ Priority:
+
+
+
+
+ SRC:
+
+
+
+
+ EDP:
+
+
+
+
+ DP:
+
+
+
+
+ PGN:
+
+
+
+
+ PF:
+
+
+
+
+ PS:
+
+
+
+
+ GMLAN 29bit decoding
+
+
+
+
+ Priority bits:
+
+
+
+
+ Arbitration Id:
+
+
+
+
+ Sender Id:
+
+
+
+
+ # of frames:
+
+
+
+
+
+ Data Length:
+
+
+
+
+
+ to
+
+
+
+
+ Average inter-frame interval:
+
+
+
+
+ Minimum inter-frame interval:
+
+
+
+
+ Maximum inter-frame interval:
+
+
+
+
+ Inter-frame interval variation:
+
+
+
+
+ Interval standard deviation:
+
+
+
+
+ Minimum range to fit 90% of inter-frame intervals:
+
+
+
+
+ Data Byte
+
+
+
+
+ Changed bits: 0x
+
+
+
+
+ Range:
+
+
+
+
+ Histogram
+
+
+
+
+ Bitfield Histogram
+
+
+
+
+ Bitchange Heatmap
+
+
+
+
+ Text File (*.txt)
+
+
+
+
+ FramePlaybackWindow
+
+
+
+ Playback
+
+
+
+
+
+ Use original frame timing from captured frames
+
+
+
+
+
+ Wait for traffic before starting playback
+
+
+
+
+
+ Playback speed (ms):
+
+
+
+
+
+ Burst Rate:
+
+
+
+
+
+ Current Playback Item:
+
+
+
+
+
+ TextLabel
+
+
+
+
+
+ Current frame:
+
+
+
+
+
+ x of y
+
+
+
+
+
+ Loop Sequence
+
+
+
+
+
+ Send to CANBus
+
+
+
+
+
+ <html><head/><body><p>Playback Sequence:</p></body></html>
+
+
+
+
+
+ Load File
+
+
+
+
+
+ Load Captured Data
+
+
+
+
+
+ Delete Selected
+
+
+
+
+
+ ID Filtering:
+
+
+
+
+
+ Select all IDs
+
+
+
+
+
+ Deselect all IDs
+
+
+
+
+
+ Load Filters
+
+
+
+
+
+ Save Filters
+
+
+
+
+
+ All
+
+
+
+
+
+ From File
+
+
+
+
+ Save filter definition to file
+
+
+
+
+ Load filter definition from file
+
+
+
+
+ Filter list (*.ftl)
+
+
+
+
+ Filter List (*.ftl)
+
+
+
+
+
+ of
+
+
+
+
+ FrameSenderWindow
+
+
+
+ Frame Sender
+
+
+
+
+
+ Enable All
+
+
+
+
+
+ Disable All
+
+
+
+
+
+ Clear Grid
+
+
+
+
+
+ Load to Grid
+
+
+
+
+
+ Save Grid
+
+
+
+
+
+ Frame Sender Definition (*.fsd)
+
+
+
+
+ FuzzingWindow
+
+
+
+ Fuzzing Window
+
+
+
+
+
+ Interframe Timing (ms)
+
+
+
+
+
+ Number of data bytes
+
+
+
+
+
+ Burst Rate
+
+
+
+
+
+ Bus or Buses to Send On
+
+
+
+
+
+ ID Scanning
+
+
+
+
+
+ Seqential
+
+
+
+
+
+
+
+ Random
+
+
+
+
+
+ ID Selection
+
+
+
+
+
+ Range of IDs
+
+
+
+
+
+ Filter List
+
+
+
+
+
+ Bit Scanning
+
+
+
+
+
+ Sequential
+
+
+
+
+
+ Sweep
+
+
+
+
+
+ IDs
+
+
+
+
+
+ Start ID:
+
+
+
+
+
+ End ID:
+
+
+
+
+
+
+ All
+
+
+
+
+
+ None
+
+
+
+
+
+ Byte Values (Always in hexadecimal)
+
+
+
+
+
+ 0
+
+
+
+
+
+ 1
+
+
+
+
+
+ 2
+
+
+
+
+
+ 3
+
+
+
+
+
+ 4
+
+
+
+
+
+ 5
+
+
+
+
+
+ 6
+
+
+
+
+
+ 7
+
+
+
+
+
+ 8
+
+
+
+
+
+ 9
+
+
+
+
+
+ 10
+
+
+
+
+
+ 11
+
+
+
+
+
+ 12
+
+
+
+
+
+ 13
+
+
+
+
+
+ 14
+
+
+
+
+
+ 15
+
+
+
+
+
+ White = Bit always 0, Green = Fuzz Bit, Black = Bit always set, Gray = Past end of data bytes
+
+
+
+
+
+ All High
+
+
+
+
+
+ All Low
+
+
+
+
+
+ All Auto
+
+
+
+
+
+ Start Fuzzing
+
+
+
+
+
+ # of sent frames:
+
+
+
+
+ GraphingWindow
+
+
+
+ Data Graphing
+
+
+
+
+ Move to top left
+
+
+
+
+ Move to top center
+
+
+
+
+ Move to top right
+
+
+
+
+ Move to bottom right
+
+
+
+
+ Move to bottom left
+
+
+
+
+ Save graph image to file
+
+
+
+
+ Save graph definitions to file
+
+
+
+
+ Load graph definitions from file
+
+
+
+
+ Save spreadsheet of data
+
+
+
+
+ Follow end of graph
+
+
+
+
+ Add new graph
+
+
+
+
+ Edit selected graph
+
+
+
+
+ Remove selected graph
+
+
+
+
+ Remove all graphs
+
+
+
+
+ Reset View
+
+
+
+
+ Rescale to data
+
+
+
+
+ Zoom In
+
+
+
+
+ Zoom Out
+
+
+
+
+ PDF Files (*.pdf)
+
+
+
+
+ PNG Files (*.png)
+
+
+
+
+ JPEG Files (*.jpg)
+
+
+
+
+ Spreadsheet (*.csv)
+
+
+
+
+
+ Graph definition (*.gdf)
+
+
+
+
+ HelpWindow
+
+
+
+ SavvyCAN Help
+
+
+
+
+ ISOTP_InterpreterWindow
+
+
+
+ ISO-TP Decoder
+
+
+
+
+
+ Interpreted Messages Overview
+
+
+
+
+
+ Interpret Previously Captured Frames
+
+
+
+
+
+ Clear Messages List
+
+
+
+
+
+ Save List
+
+
+
+
+
+ Show incomplete and/or corrupted messages
+
+
+
+
+
+ Use extended addressing
+
+
+
+
+
+ Data Details of Selected Message
+
+
+
+
+
+ IDs to Decode
+
+
+
+
+
+ All
+
+
+
+
+
+ None
+
+
+
+
+ Text File (*.txt)
+
+
+
+
+ Raw Payload:
+
+
+
+
+ MainSettingsDialog
+
+
+
+ Main Settings
+
+
+
+
+
+ Main Form Settings:
+
+
+
+
+
+ Autoscroll main frame window by default
+
+
+
+
+
+ Maximum data bytes per line
+
+
+
+
+
+ General Settings:
+
+
+
+
+
+ Save/Restore window positions and sizes
+
+
+
+
+
+ Save/Restore CAN bus connections
+
+
+
+
+
+ Display values as hexadecimal
+
+
+
+
+
+ Require validation of GVRET connection
+
+
+
+
+
+ Use filtered frames in sub-windows
+
+
+
+
+
+ OpenGL Accelerated AntiAliased Graphing
+
+
+
+
+
+ CAN Frame Pre-allocation Size
+
+
+
+
+
+ Time Keeping
+
+
+
+
+
+ Seconds/Milli/Micro are dongle based
+
+
+
+
+
+ Seconds
+
+
+
+
+
+ Microseconds
+
+
+
+
+
+ Milliseconds
+
+
+
+
+
+ System Clock
+
+
+
+
+
+ Time Format String:
+
+
+
+
+
+ Use absolute time in decoded CSV output
+
+
+
+
+
+ Font
+
+
+
+
+
+ Use fixed-width font in tables
+
+
+
+
+
+ Size
+
+
+
+
+
+ Flowview Settings:
+
+
+
+
+
+ Use timestamp mode by default
+
+
+
+
+
+ Set Auto Reference by default
+
+
+
+
+
+
+
+ Hexadecimal Graph Y Axis
+
+
+
+
+
+ Playback Window Settings:
+
+
+
+
+
+ Loop by default
+
+
+
+
+
+ Default playback speed (ms)
+
+
+
+
+
+ Default Sending Bus
+
+
+
+
+
+ DBC Settings
+
+
+
+
+
+ Label DBC messages by default
+
+
+
+
+
+ Ignore DBC message colors
+
+
+
+
+
+ File Info and Comparator Settings:
+
+
+
+
+
+ Auto expand all nodes
+
+
+
+
+
+ MQTT Remote CAN Settings:
+
+
+
+
+
+ Host:
+
+
+
+
+
+ Port:
+
+
+
+
+
+ User Name:
+
+
+
+
+
+ Password
+
+
+
+
+
+ Some settings will not take effect until the application is restarted
+
+
+
+
+ None
+
+
+
+
+ 0
+
+
+
+
+ 1
+
+
+
+
+ All
+
+
+
+
+ From File
+
+
+
+
+ MainWindow
+
+
+
+ SavvyCAN
+
+
+
+
+
+ Remote Connection Active:
+
+
+
+
+
+ Total Frames Captured:
+
+
+
+
+
+ Frames Per Second:
+
+
+
+
+
+ Suspend Capturing
+
+
+
+
+
+ Normalize Frame Timing
+
+
+
+
+
+ Clear Frames
+
+
+
+
+
+ Keep Filters When Clearing
+
+
+
+
+
+ Auto Scroll Window
+
+
+
+
+
+ Overwrite Mode
+
+
+
+
+
+ Interpret Frames
+
+
+
+
+
+ Expand All Rows
+
+
+
+
+
+ Collapse All Rows
+
+
+
+
+
+ Bus Filtering:
+
+
+
+
+
+ Frame Filtering:
+
+
+
+
+
+ All
+
+
+
+
+
+ None
+
+
+
+
+
+ RE Tools
+
+
+
+
+
+ Send Frames
+
+
+
+
+
+ File
+
+
+
+
+
+ Connection
+
+
+
+
+
+ Playback
+
+
+
+
+
+ Custom
+
+
+
+
+
+ Flow View
+
+
+
+
+
+ Fuzzy Scope
+
+
+
+
+
+ New Graphing Window
+
+
+
+
+
+ Load Log File
+
+
+
+
+
+ Ctrl+O
+
+
+
+
+
+ Save Log File
+
+
+
+
+
+ Frame Data Analysis
+
+
+
+
+
+ Load DBC File
+
+
+
+
+
+ Edit Messages/Signals
+
+
+
+
+
+ Save DBC File
+
+
+
+
+
+ Save Decoded Frames
+
+
+
+
+
+ Exit Application
+
+
+
+
+
+ File Comparison
+
+
+
+
+
+ Preferences
+
+
+
+
+
+ Save Filtered Log File
+
+
+
+
+
+ Load Filter Definition
+
+
+
+
+
+ Save Filter Definition
+
+
+
+
+
+ Firmware Uploader
+
+
+
+
+
+ Open Connection Window
+
+
+
+
+
+ Connect
+
+
+
+
+
+ Scripting Interface
+
+
+
+
+
+ Range State
+
+
+
+
+
+ Single/Multi State
+
+
+
+
+
+ DBC File Manager
+
+
+
+
+
+ Fuzzing
+
+
+
+
+
+ UDS Scanner
+
+
+
+
+
+ ISO-TP Decoder
+
+
+
+
+
+ Sniffer
+
+
+
+
+
+ Firmware Update
+
+
+
+
+
+ MotorControlConfig
+
+
+
+
+
+ Capture Bisector
+
+
+
+
+
+ Signal Viewer
+
+
+
+
+
+
+ Start Continuous Logging
+
+
+
+
+
+ Temporal Graph
+
+
+
+
+
+ DBC Comparison
+
+
+
+
+
+ Save Decoded Frames CSV
+
+
+
+
+
+ CAN Bridge
+
+
+
+
+ Connected to 0 buses
+
+
+
+
+ Press F1 on any screen for help
+
+
+
+
+ Add to a new graphing window
+
+
+
+
+ Add to latest graphing window
+
+
+
+
+ Cease Continuous Logging
+
+
+
+
+ Filter list (*.ftl)
+
+
+
+
+ Filter List (*.ftl)
+
+
+
+
+ Text File (*.txt *.TXT)
+
+
+
+
+ CSV File (*.csv *.CSV)
+
+
+
+
+ Year
+
+
+
+
+ Month
+
+
+
+
+ Day
+
+
+
+
+ Hour
+
+
+
+
+ Minute
+
+
+
+
+ Second
+
+
+
+
+ Ms
+
+
+
+
+ Time
+
+
+
+
+ ID
+
+
+
+
+ Bus
+
+
+
+
+ DataLen
+
+
+
+
+ Time:
+
+
+
+
+ ID:
+
+
+
+
+ Ext
+
+
+
+
+ Std
+
+
+
+
+ Bus:
+
+
+
+
+ Data Bytes:
+
+
+
+
+ Connected to
+
+
+
+
+ buses
+
+
+
+
+ No packets loaded
+
+
+
+
+ No file loaded
+
+
+
+
+ MotorControllerConfigWindow
+
+
+
+ Controller Configuration
+
+
+
+
+
+ Load Definition File
+
+
+
+
+
+ Refresh
+
+
+
+
+
+ Save
+
+
+
+
+ RMS Definition File (*.txt *.TXT)
+
+
+
+
+ NewConnectionDialog
+
+
+
+ New Connection
+
+
+
+
+
+ Connection Type
+
+
+
+
+
+ socketcand (SocketCAN over Ethernet)
+
+
+
+
+
+ QT SerialBus Devices (SocketCAN, PeakCAN, etc)
+
+
+
+
+
+ MQTT Connection
+
+
+
+
+
+ Serial Connection (GVRET)
+
+
+
+
+
+ Network connection (GVRET)
+
+
+
+
+
+ LAWICEL / SLCAN Serial
+
+
+
+
+
+ CANserver
+
+
+
+
+
+ CANlogserver
+
+
+
+
+
+ SerialBus Device Type:
+
+
+
+
+
+ Serial Port:
+
+
+
+
+
+ Serial Port Speed:
+
+
+
+
+
+ CAN Bus Speed:
+
+
+
+
+
+ CAN-FD
+
+
+
+
+
+ CAN-FD data rate
+
+
+
+
+
+ Create New Connection
+
+
+
+
+ NewGraphDialog
+
+
+
+ Graph Settings
+
+
+
+
+
+ <html><head/><body><p>Name:</p></body></html>
+
+
+
+
+
+ ID:
+
+
+
+
+
+ Start Bit:
+
+
+
+
+
+ Graph a DBC Signal:
+
+
+
+
+
+ Node:
+
+
+
+
+
+ Message:
+
+
+
+
+
+ Signal:
+
+
+
+
+
+ Copy Signal Parameters
+
+
+
+
+
+ Bit Len:
+
+
+
+
+
+ Little Endian
+
+
+
+
+
+ (LSB First)
+
+
+
+
+
+ Signed:
+
+
+
+
+
+ Mask:
+
+
+
+
+
+ Bias:
+
+
+
+
+
+ Scale
+
+
+
+
+
+ Stride
+
+
+
+
+
+ Associated Bus
+
+
+
+
+
+ -1
+
+
+
+
+
+ Only Points
+
+
+
+
+
+ Point Style
+
+
+
+
+
+ Line Thickness
+
+
+
+
+
+ Line Color
+
+
+
+
+
+
+
+ CHANGE
+
+
+
+
+
+ Fill Color
+
+
+
+
+
+ Add this graph
+
+
+
+
+ QObject
+
+
+ The %1 part contains more than one '-' sign
+
+
+
+
+
+
+ Unable to parse the %1 part to integer
+
+
+
+
+ RangeStateWindow
+
+
+
+ Range State Window
+
+
+
+
+
+ Candidate Signals:
+
+
+
+
+
+ Graphical Representation of Selected Signal:
+
+
+
+
+
+ Sensitivity
+
+
+
+
+
+ Min Signal Size:
+
+
+
+
+
+ Max Signal Size:
+
+
+
+
+
+ Granularity:
+
+
+
+
+
+ Signal Mode:
+
+
+
+
+
+ Signed Mode:
+
+
+
+
+
+ ID Filter:
+
+
+
+
+
+ All
+
+
+
+
+
+ None
+
+
+
+
+
+ Recalculate Candidate Signals
+
+
+
+
+ Big Endian
+
+
+
+
+ Little Endian
+
+
+
+
+
+ Try Both
+
+
+
+
+ Signed Value
+
+
+
+
+ Unsigned Value
+
+
+
+
+ ScriptingWindow
+
+
+
+ Scripting Interface
+
+
+
+
+
+ Public Variables
+
+
+
+
+
+ Loaded Scripts
+
+
+
+
+
+ &New
+
+
+
+
+
+ &Del
+
+
+
+
+
+ &Load
+
+
+
+
+
+ Script Editing Window
+
+
+
+
+
+ &Save
+
+
+
+
+
+ Sa&ve As
+
+
+
+
+
+ &Revert
+
+
+
+
+
+ R&eload
+
+
+
+
+
+ Re&compile
+
+
+
+
+
+ Log Window
+
+
+
+
+
+ &Auto Scroll Log Window
+
+
+
+
+
+ Clear Log &Window
+
+
+
+
+
+ Save L&og
+
+
+
+
+
+ Javascript File (*.js)
+
+
+
+
+ Log File (*.log)
+
+
+
+
+ SignalViewerWindow
+
+
+
+ Signal Viewer
+
+
+
+
+
+ Remove Selected Signal
+
+
+
+
+
+ Node
+
+
+
+
+
+ Message
+
+
+
+
+
+ Signal
+
+
+
+
+
+ Add To Viewer
+
+
+
+
+
+ Save View
+
+
+
+
+
+ Load View
+
+
+
+
+
+ Append to View
+
+
+
+
+
+ Clear View
+
+
+
+
+
+ SignalViewer definition (*.sdf)
+
+
+
+
+ TemporalGraphWindow
+
+
+
+ Temporal Graph
+
+
+
+
+ TriggerDialog
+
+
+
+ Trigger Builder
+
+
+
+
+
+ Add New
+
+
+
+
+
+ Delete
+
+
+
+
+
+ Bus
+
+
+
+
+
+ Msg ID
+
+
+
+
+
+ Signal
+
+
+
+
+
+ MS Delay
+
+
+
+
+
+ Max Count
+
+
+
+
+
+ Signal Value
+
+
+
+
+
+ Save And Update
+
+
+
+
+ UDSScanWindow
+
+
+
+ UDS Scanner
+
+
+
+
+
+ Scans To Run
+
+
+
+
+
+ Add
+
+
+
+
+
+ Delete
+
+
+
+
+
+ Load
+
+
+
+
+
+ Save
+
+
+
+
+
+ Starting ID
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ 0x
+
+
+
+
+
+ Ending ID
+
+
+
+
+
+ Show "No Reply"
+
+
+
+
+
+ Allow adaptive reply offset
+
+
+
+
+
+ Bus to scan
+
+
+
+
+
+ Maximum reply delay (ms)
+
+
+
+
+
+ Reply Offset:
+
+
+
+
+
+ Scan Type:
+
+
+
+
+
+ Run test in session type:
+
+
+
+
+
+ Subfunct Len:
+
+
+
+
+
+ Lower Bound:
+
+
+
+
+
+ Upper Bound:
+
+
+
+
+
+ Increment
+
+
+
+
+
+ Lower Service:
+
+
+
+
+
+ Upper Service:
+
+
+
+
+
+ Results
+
+
+
+
+
+ Run All Scans
+
+
+
+
+
+ Run Selected Scan
+
+
+
+
+
+ Save Scan Results
+
+
+
+
+
+ UDS Test Specification (*.uds *.UDS)
+
+
+
+
+ Text File (*.txt)
+
+
+
+
+ snifferWindow
+
+
+
+ Sniffer
+
+
+
+
+
+ Notch
+
+
+
+
+
+ Unnotch
+
+
+
+
+
+ Mute notched bits
+
+
+
+
+
+ Notch Interval
+
+
+
+
+
+
+
+ ms
+
+
+
+
+
+ Expire Interval
+
+
+
+
+
+ Never Expire IDs
+
+
+
+
+
+ Fade inactive bytes
+
+
+
+
+
+ View Bits
+
+
+
+
+
+ Filters:
+
+
+
+
+
+ All
+
+
+
+
+
+ None
+
+
+
+
diff --git a/translations/savvycan_pt_BR.ts b/translations/savvycan_pt_BR.ts
new file mode 100644
index 0000000..13ec980
--- /dev/null
+++ b/translations/savvycan_pt_BR.ts
@@ -0,0 +1,4161 @@
+
+
+
+
+ BisectWindow
+
+
+
+ Bisector Window
+ Janela Bissetriz
+
+
+
+
+ Splitting Strategy:
+ Estratégia de divisão:
+
+
+
+
+ ID Range
+ Intervalo de IDs
+
+
+
+
+ TO
+ PARA
+
+
+
+
+ Frame Number
+ Número do frame
+
+
+
+
+ Percentage
+ Percentagem
+
+
+
+
+ Bus Number
+ Número do Barramento
+
+
+
+
+ Save Which Side:
+ Salvar qual lado:
+
+
+
+
+ Lower Section
+ Seção Inferior
+
+
+
+
+ Upper Section
+ Seção Superior
+
+
+
+
+ Number of Frames in Main List:
+ Número de Frames na lista principal:
+
+
+
+
+
+
+ 0
+ 0
+
+
+
+
+ Saved Frames after split:
+ Frames salvos após divisão:
+
+
+
+
+ Calculate Split
+ Calcular divisão
+
+
+
+
+ Save split frames to a new file
+ Salve os frames divididos em um novo arquivo
+
+
+
+
+ Replace main list with split frames
+ Substitua a lista principal por frames divididos
+
+
+
+ Successfully saved file
+ Arquivo salvo com sucesso
+
+
+
+ Error while attempting to save.
+ Erro ao tentar salvar.
+
+
+
+ CANBridgeWindow
+
+
+
+ CAN Bridger
+ Ponte CAN
+
+
+
+
+ Side 1
+ Lado 1
+
+
+
+
+
+
+ Enable forwarding
+ Ativar encaminhamento
+
+
+
+
+ IDs to forward to side 2
+ IDs para encaminhar para o lado 2
+
+
+
+
+ Side 2
+ Lado 2
+
+
+
+
+ IDs to forward to side 1
+ IDs para encaminhar para o lado 1
+
+
+
+ CANConnectionModel
+
+
+ Type
+ Tipo
+
+
+
+ Subtype
+ Subtipo
+
+
+
+ Port
+ Porta
+
+
+
+ Buses
+ Barramento
+
+
+
+ Status
+ Status
+
+
+
+ CANDataGrid
+
+
+
+ Form
+ Forma
+
+
+
+ CANFrameModel
+
+
+ Rx
+ Rx
+
+
+
+ Tx
+ Tx
+
+
+
+ Time Delta
+ Time Delta
+
+
+
+ Timestamp
+ Timestamp
+
+
+
+ ID
+ ID
+
+
+
+ Ext
+ Ext
+
+
+
+ RTR
+ RTR
+
+
+
+ Cnt
+ Cnt
+
+
+
+ Dir
+ Dir
+
+
+
+ Bus
+ Bus
+
+
+
+ Len
+ Len
+
+
+
+ ASCII
+ ASCII
+
+
+
+ Data
+ Data
+
+
+
+ ConnectionWindow
+
+
+
+ Connection Settings
+ Configurações de conexão
+
+
+
+
+ Disconnect Selected Device
+ Desconectar dispositivo selecionado
+
+
+
+
+ Reset Selected Device
+ Redefinir dispositivo selecionado
+
+
+
+
+ Bus Details:
+ Detalhes do Barramento:
+
+
+
+
+ Speed:
+ Velocidade:
+
+
+
+
+ Listen Only:
+ Escutar apenas:
+
+
+
+
+ Enable Bus:
+ Habilitar barramento:
+
+
+
+
+ Save Bus Settings
+ Salvar configurações do barramento
+
+
+
+
+ Enable CAN FD:
+ Ativar CAN FD:
+
+
+
+
+ CAN FD Data Rate
+ Taxa de dados CAN FD
+
+
+
+
+ Connected Devices:
+ Dispositivos conectados:
+
+
+
+
+ Add New Device Connection
+ Adicionar nova conexão de dispositivo
+
+
+
+
+ Enable Console
+ Habilitar console
+
+
+
+
+ Device Console:
+ Console do dispositivo:
+
+
+
+
+ Send:
+ Enviar:
+
+
+
+
+ Send Hex
+ Enviar hexadecimal
+
+
+
+
+ Send Text
+ Enviar texto
+
+
+
+
+ Clear
+ Limpar
+
+
+
+ DBCComparatorWindow
+
+
+
+ DBC Comparator
+ Comparador DBC
+
+
+
+
+ Side 1
+ Lado 1
+
+
+
+
+
+
+ TextLabel
+ TextLabel
+
+
+
+
+ Load New File
+ Carregar novo arquivo
+
+
+
+
+ Side 2
+ Lado 2
+
+
+
+
+ Load A File
+ Carregar um arquivo
+
+
+
+
+ Save Details to File
+ Salvar detalhes no arquivo
+
+
+
+ DBC Files (*.dbc *.DBC)
+ Arquivos DBC (*.dbc *.DBC)
+
+
+
+ Text File (*.txt)
+ Arquivo de texto (*.txt)
+
+
+
+ DBCHandler
+
+
+
+ DBC File (*.dbc)
+ Arquivo DBC (*.dbc)
+
+
+
+ DBCLoadSaveWindow
+
+
+
+ DBC File Manager
+ Gerenciador de arquivos DBC
+
+
+
+
+ Create new DBC
+ Criar novo DBC
+
+
+
+
+ Load
+ Carregar
+
+
+
+
+ Remove
+ Remover
+
+
+
+
+ Move Up
+ Subir
+
+
+
+
+ Save
+ Salvar
+
+
+
+
+ Edit
+ Editar
+
+
+
+
+ Move Down
+ Descer
+
+
+
+ DBC File (*.dbc)
+ Arquivo DBC (*.dbc)
+
+
+
+ Tesla JSON File (*.json)
+ Arquivo JSON Tesla (*.json)
+
+
+
+ Secret CSV Signal Defs (*.csv)
+ Defs de sinal CSV secreto (*.csv)
+
+
+
+ DBCMainEditor
+
+
+
+ DBC Editing Window
+ Janela de edição DBC
+
+
+
+
+ New Node
+ Novo nó
+
+
+
+
+ New Message
+ Nova mensagem
+
+
+
+
+ New Signal
+ Novo sinal
+
+
+
+
+ Delete
+ Excluir
+
+
+
+
+ Find:
+ Encontrar:
+
+
+
+
+ Search
+ Procurar
+
+
+
+
+ Search Results: 0 of 0
+ Resultados da pesquisa: 0 de 0
+
+
+
+
+ Next
+ Próximo
+
+
+
+
+ Previous
+ Anterior
+
+
+
+ Delete currently selected message
+ Excluir mensagem atualmente selecionada
+
+
+
+ Rebase all messages
+ Rebase todas as mensagens
+
+
+
+ Rebase all messages in node
+ Rebase todas as mensagens no nó
+
+
+
+ Duplicate node
+ Nó duplicado
+
+
+
+ Duplicate node and messages
+ Nó e mensagens duplicados
+
+
+
+ DBCMessageEditor
+
+
+
+ Message Editor
+ Editor de mensagens
+
+
+
+
+ Frame ID:
+ ID do Frame:
+
+
+
+
+ Message Name:
+ Nome da mensagem:
+
+
+
+
+ Frame Length:
+ Comprimento do Frame:
+
+
+
+
+ Text Color:
+ Cor do texto:
+
+
+
+
+ Background Color:
+ Cor de fundo:
+
+
+
+
+ Comments:
+ Comentários:
+
+
+
+
+ Sending Node:
+ Nó de envio:
+
+
+
+
+
+
+ Set
+ Definir
+
+
+
+
+ Sample Colored Output:
+ Exemplo de saída colorida:
+
+
+
+ DBCNodeDuplicateEditor
+
+
+
+
+
+ Duplicate Node
+ Nó duplicado
+
+
+
+
+ New Node Name:
+ Novo nome do nó:
+
+
+
+
+ Current Base ID:
+ ID base atual:
+
+
+
+
+ New Base ID:
+ Nova ID base:
+
+
+
+
+ Cancel
+ Cancelar
+
+
+
+ DBCNodeEditor
+
+
+
+ Node Editor
+ Editor de nós
+
+
+
+
+ Node Name:
+ Nome do nó:
+
+
+
+
+ Comments:
+ Comentários:
+
+
+
+ DBCNodeRebaseEditor
+
+
+
+ Rebase All Node Messages
+ Rebase todas mensagens de nó
+
+
+
+
+ Node Name:
+ Nome do nó:
+
+
+
+
+ Current Base ID:
+ ID base atual:
+
+
+
+
+ New Base ID:
+ Novo ID base:
+
+
+
+
+ Rebase All Messages in Node
+ Rebase todas mensagens do nó
+
+
+
+
+ Cancel
+ Cancelar
+
+
+
+ DBCSignalEditor
+
+
+
+ Signal Editor
+ Editor de sinais
+
+
+
+
+ Name:
+ Nome:
+
+
+
+
+ Bit Length:
+ Comprimento do bit:
+
+
+
+
+ Byte Order
+ Ordem de bytes
+
+
+
+
+ LSB First (Little Endian)
+ LSB Primeiro (Little Endian)
+
+
+
+
+ Type:
+ Tipo:
+
+
+
+
+ Scale:
+ Escala:
+
+
+
+
+ Bias:
+ Deslocamento:
+
+
+
+
+ Min Value:
+ Valor mínimo:
+
+
+
+
+ Max Value:
+ Valor máximo:
+
+
+
+
+ Units Name:
+ Nome das unidades:
+
+
+
+
+ Receiving Node:
+ Nó de recepção:
+
+
+
+
+ Multiplexing
+ Multiplexação
+
+
+
+
+ None
+ Nenhum
+
+
+
+
+ Multiplexed
+ Multiplexado
+
+
+
+
+ Multiplexor
+ Multiplexador
+
+
+
+
+ Extended
+ Estendido
+
+
+
+
+ Multiplex value
+ Valor multiplexado
+
+
+
+
+ Multiplex Parent
+ Parente multiplexado
+
+
+
+
+ Comment:
+ Comentário:
+
+
+
+
+ Single values has to be separated by semicolons
+and the value ranges by hypens
+(e.g.: 1;2;5-7)
+ Valores únicos devem ser separados por ponto e vírgula
+e os intervalos de valores por hífens
+(ex.: 1;2;5-7)
+
+
+
+
+ Value Table:
+ Tabela de valores:
+
+
+
+ Error
+ Erro
+
+
+
+ The multiplex values field contains errors:
+%1
+ O campo de valores multiplex contém erros:
+%1
+
+
+
+ Delete currently selected value
+ Excluir o valor atualmente selecionado
+
+
+
+ DiscreteStateWindow
+
+
+
+ Single/Multi State WIndow
+ Janela de estado único/multiplo
+
+
+
+
+ Candidate Matches:
+ Partidas de candidatos:
+
+
+
+
+ Number of States:
+ Número de estados:
+
+
+
+
+ Realtime
+ Em tempo real
+
+
+
+
+ From logged data
+ Dos dados do log
+
+
+
+
+ Toggle Frequency (Seconds)
+ Alternar frequência (segundos)
+
+
+
+
+ Iterations
+ Iterações
+
+
+
+
+ WAIT
+ ESPERE
+
+
+
+
+ Min Bits
+ Bits mínimos
+
+
+
+
+ Max Bits
+ Máximo de bits
+
+
+
+
+ IDs to Scan
+ IDs para digitalizar
+
+
+
+
+ All
+ Todos
+
+
+
+
+ None
+ Nenhum
+
+
+
+
+ Go for it
+ Vá em frente
+
+
+
+ FileComparatorWindow
+
+
+
+ File Comparator
+ Comparador de arquivos
+
+
+
+
+ SIDE 1
+ LADO 1
+
+
+
+
+ Single file to compare to side 2:
+ Arquivo único para comparar com o lado 2:
+
+
+
+
+
+
+ TextLabel
+ TextLabel
+
+
+
+
+ Load New File
+ Carregar novo arquivo
+
+
+
+
+ Side 2
+ Lado 2
+
+
+
+
+ One or more files to compare with the single file on side1:
+ Um ou mais arquivos para comparar com o arquivo único no lado 1:
+
+
+
+
+ Load A File
+ Carregar um arquivo
+
+
+
+
+ Clear Frames
+ Limpar Frames
+
+
+
+
+ Show only data unique to Side 1
+ Mostrar apenas dados exclusivos do Lado 1
+
+
+
+
+ Save Details to File
+ Salvar detalhes em arquivo
+
+
+
+ Text File (*.txt)
+ Arquivo de texto (*.txt)
+
+
+
+ FirmwareUploaderWindow
+
+
+
+ Firmware Updater
+ Atualizador de firmware
+
+
+
+
+ Loaded File:
+ Arquivo carregado:
+
+
+
+
+ Load File
+ Carregar arquivo
+
+
+
+
+ Device Token:
+ Token do dispositivo:
+
+
+
+
+ CAN Bus:
+ Barramento CAN:
+
+
+
+
+ Base Address:
+ Endereço básico:
+
+
+
+
+ X of Y bytes
+ X de Y bytes
+
+
+
+
+ Start Upload
+ Iniciar upload
+
+
+
+ Raw firmware binary (*.bin)
+ Arquivo binário de firmware (*.bin)
+
+
+
+ FlowViewWindow
+
+
+
+ Flow View
+ Visualização de fluxo
+
+
+
+
+ Playback Control
+ Controle de reprodução
+
+
+
+
+ Playback Speed:
+ Velocidade de reprodução:
+
+
+
+
+ Loop Playback
+ Reprodução em loop
+
+
+
+
+ Current Frame:
+ Frame Atual:
+
+
+
+
+ X of Y
+ X de Y
+
+
+
+
+ Live Mode (No Playback)
+ Modo ao vivo (sem reprodução)
+
+
+
+
+ Synchronize windows
+ Sincronizar janelas
+
+
+
+
+ Graph by timestamp
+ Gráfico por carimbo de data/hora
+
+
+
+
+ Auto Reference
+ Referência automática
+
+
+
+
+ Reference Values (Hex)
+ Valores de referência (Hex)
+
+
+
+
+
+
+
+
+
+
+ 0
+ 0
+
+
+
+
+
+
+
+
+
+
+ 1
+ 1
+
+
+
+
+
+
+
+
+
+
+ 2
+ 2
+
+
+
+
+
+
+
+
+
+
+ 3
+ 3
+
+
+
+
+
+
+
+
+
+
+ 4
+ 4
+
+
+
+
+
+
+
+
+
+
+ 5
+ 5
+
+
+
+
+
+
+
+
+
+
+ 6
+ 6
+
+
+
+
+
+
+
+
+
+
+ 7
+ 7
+
+
+
+
+ Current Values (Hex)
+ Valores Atuais (Hex)
+
+
+
+
+ Data Seek Values
+ Valores de busca de dados
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ -1
+ -1
+
+
+
+
+ Chart range
+ Intervalo do gráfico
+
+
+
+
+ 50
+ 50
+
+
+
+
+ Timeline:
+ Linha do tempo:
+
+
+
+
+ Frame IDs Found:
+ IDs de Frame encontrados:
+
+
+
+
+ Save image to file
+ Salvar imagem em arquivo
+
+
+
+ PDF Files (*.pdf)
+ Arquivos PDF (*.pdf)
+
+
+
+
+ PNG Files (*.png)
+ Arquivos PNG (*.png)
+
+
+
+
+ JPEG Files (*.jpg)
+ Arquivos JPEG (*.jpg)
+
+
+
+ of
+ de
+
+
+
+ FrameFileIO
+
+
+
+
+ GVRET Logs (*.csv *.CSV)
+ Logs do GVRET (*.csv *.CSV)
+
+
+
+
+ CRTD Logs (*.crt *.crtd *.CRT *.CRTD)
+ Logs do CRTD (*.crt *.crtd *.CRT *.CRTD)
+
+
+
+
+ Generic ID/Data CSV (*.csv *.CSV)
+ ID genérico/CSV de dados (*.csv *.CSV)
+
+
+
+
+ BusMaster Log (*.log *.LOG)
+ Log do BusMaster (*.log *.LOG)
+
+
+
+
+ Microchip Log (*.can *.CAN *.log *.LOG)
+ Logs do Microchip (*.can *.CAN *.log *.LOG)
+
+
+
+ Vector Trace Files (*.trace *.TRACE)
+ Arquivos de rastreamento Vector (*.trace *.TRACE)
+
+
+
+
+ IXXAT MiniLog (*.csv *.CSV)
+ MiniLog IXXAT (*.csv *.CSV)
+
+
+
+ CAN-DO Log (*.can *.avc *.evc *.qcc *.CAN *.AVC *.EVC *.QCC)
+ Logs do CAN-DO (*.can *.avc *.evc *.qcc *.CAN *.AVC *.EVC *.QCC)
+
+
+
+
+ Vehicle Spy (*.csv *.CSV)
+ Vehicle Spy (*.csv *.CSV)
+
+
+
+ Candump/Kayak (*.log)
+ Candump/Kayak (*.log)
+
+
+
+
+ Cabana Log (*.csv *.CSV)
+ Logs do Cabana (*.csv *.CSV)
+
+
+
+
+ CANalyzer Ascii Log (*.asc *.ASC)
+ Logs Ascii do CANalyzer (*.asc *.ASC)
+
+
+
+ CARBUS Analyzer (*.trc *.TRC)
+ Analisador CARBUS (*.trc *.TRC)
+
+
+
+ Autodetect File Type (*.*)
+ Detecção automática do tipo de arquivo (*.*)
+
+
+
+ Vector trace files (*.trace *.TRACE)
+ Arquivos de rastreamento Vector (*.trace *.TRACE)
+
+
+
+ CAN-DO Log (*.avc *.can *.evc *.qcc *.AVC *.CAN *.EVC *.QCC)
+ Log CAN-DO (*.avc *.can *.evc *.qcc *.AVC *.CAN *.EVC *.QCC)
+
+
+
+ Candump/Kayak (*.log *.LOG)
+ Candump/Kayak (*.log *.LOG)
+
+
+
+ CANDump Lawicel (*.txt *.TXT *.LOG *.log)
+ CANDump Lawicel (*.txt *.TXT *.LOG *.log)
+
+
+
+ PCAN Viewer (*.trc *.TRC)
+ Visualizador PCAN (*.trc *.TRC)
+
+
+
+ Kvaser Log Decimal (*.txt *.TXT)
+ Logs Decimal Kvaser (*.txt *.TXT)
+
+
+
+ Kvaser Log Hex (*.txt *.TXT)
+ Logs Hexadecimal Kvaser (*.txt *.TXT)
+
+
+
+ CANalyzer Binary Log Files (*.blf *.BLF)
+ Logs binários CANalyzer (*.blf *.BLF)
+
+
+
+ CARBUS Analyzer Trace Files (*.trc *.TRC)
+ Logs do analisador CARBUS (*.trc *.TRC)
+
+
+
+ CANHacker Trace Files (*.trc *.TRC)
+ Logs de rastreamento CANHacker (*.trc *.TRC)
+
+
+
+ CANOpen Magic (*.csv *.CSV)
+ CANOpen Magic (*.csv *.CSV)
+
+
+
+ Tesla Autopilot Snapshot (*.CAN *.can)
+ Snapshot do piloto automático Tesla (*.CAN *.can)
+
+
+
+ CLX000 (*.txt *.TXT)
+ CLX000 (*.txt *.TXT)
+
+
+
+ CANServer Binary Log (*.log *.LOG)
+ Log binário CANServer (*.log *.LOG)
+
+
+
+ Wireshark (*.pcap *.PCAP *.pcapng *.PCAPNG)
+ Wireshark (*.pcap *.PCAP *.pcapng *.PCAPNG)
+
+
+
+ Wireshark SocketCAN (*.pcap *.PCAP
+ Wireshark SocketCAN (*.pcap *.PCAP
+
+
+
+ CXX GVRET-PC Reverse Engineering Tool Output V
+ Saída V da ferramenta de engenharia reversa CXX GVRET-PC
+
+
+
+ FrameInfoWindow
+
+
+
+ Detailed Frame Information
+ Informações detalhadas do frame
+
+
+
+
+ Frame IDs:
+ IDs de frame:
+
+
+
+
+ Unique IDs
+ IDs únicos
+
+
+
+
+ Details:
+ Detalhes:
+
+
+
+
+ Save details to file
+ Salvar detalhes em arquivo
+
+
+
+
+ Interval Histogram
+ Histograma de intervalo
+
+
+
+
+ Bytes Graph
+ Gráfico de Bytes
+
+
+
+
+ unique ids)
+ ids únicos)
+
+
+
+ J1939 decoding
+ Decodificação J1939
+
+
+
+ Broadcast Frame
+ Frame de transmissão
+
+
+
+ Destination ID:
+ ID de destino:
+
+
+
+ Destination ID: Global (ALL)
+ ID de destino: Global (TODOS)
+
+
+
+ Priority:
+ Prioridade:
+
+
+
+ SRC:
+ SRC:
+
+
+
+ EDP:
+ EDP:
+
+
+
+ DP:
+ DP:
+
+
+
+ PGN:
+ PGN:
+
+
+
+ PF:
+ FP:
+
+
+
+ PS:
+ PS:
+
+
+
+ GMLAN 29bit decoding
+ Decodificação GMLAN de 29 bits
+
+
+
+ Priority bits:
+ Bits prioritários:
+
+
+
+ Arbitration Id:
+ ID de Arbitragem:
+
+
+
+ Sender Id:
+ ID do remetente:
+
+
+
+ # of frames:
+ # de quadros:
+
+
+
+
+ Data Length:
+ Comprimento dos dados:
+
+
+
+
+ to
+ para
+
+
+
+ Average inter-frame interval:
+ Intervalo médio entre frames:
+
+
+
+ Minimum inter-frame interval:
+ Intervalo mínimo entre frames:
+
+
+
+ Maximum inter-frame interval:
+ Intervalo máximo entre frames:
+
+
+
+ Inter-frame interval variation:
+ Variação do intervalo entre frames:
+
+
+
+ Interval standard deviation:
+ Desvio padrão do intervalo:
+
+
+
+ Minimum range to fit 90% of inter-frame intervals:
+ Faixa mínima para ajustar 90% dos intervalos entre quadros:
+
+
+
+ Data Byte
+ Byte de dados
+
+
+
+ Changed bits: 0x
+ Bits alterados: 0x
+
+
+
+ Range:
+ Faixa:
+
+
+
+ Histogram
+ Histograma
+
+
+
+ Bitfield Histogram
+ Histograma de campo de bits
+
+
+
+ Bitchange Heatmap
+ Mapa de calor do Bitchange
+
+
+
+ Text File (*.txt)
+ Arquivo de texto (*.txt)
+
+
+
+ FramePlaybackWindow
+
+
+
+ Playback
+ Reprodução
+
+
+
+
+ Use original frame timing from captured frames
+ Use o tempo de frame original dos frames capturados
+
+
+
+
+ Wait for traffic before starting playback
+ Aguarde o tráfego antes de iniciar a reprodução
+
+
+
+
+ Playback speed (ms):
+ Velocidade de reprodução (ms):
+
+
+
+
+ Burst Rate:
+ Taxa de burst:
+
+
+
+
+ Current Playback Item:
+ Item de reprodução atual:
+
+
+
+
+ TextLabel
+ TextLabel
+
+
+
+
+ Current frame:
+ Quadro atual:
+
+
+
+
+ x of y
+ x de y
+
+
+
+
+ Loop Sequence
+ Sequência de Loop
+
+
+
+
+ Send to CANBus
+ Enviar para CANBus
+
+
+
+
+ <html><head/><body><p>Playback Sequence:</p></body></html>
+ <html><head/><body><p>Sequência de reprodução:</p></body></html>
+
+
+
+
+ Load File
+ Carregar arquivo
+
+
+
+
+ Load Captured Data
+ Carregar dados capturados
+
+
+
+
+ Delete Selected
+ Excluir selecionado
+
+
+
+
+ ID Filtering:
+ Filtragem de ID:
+
+
+
+
+ Select all IDs
+ Selecione todos os IDs
+
+
+
+
+ Deselect all IDs
+ Desmarcar todos os IDs
+
+
+
+
+ Load Filters
+ Carregar filtros
+
+
+
+
+ Save Filters
+ Salvar filtros
+
+
+
+
+ All
+ Todos
+
+
+
+
+ From File
+ Do arquivo
+
+
+
+ Save filter definition to file
+ Salvar definição de filtro em arquivo
+
+
+
+ Load filter definition from file
+ Carregar definição de filtro do arquivo
+
+
+
+ Filter list (*.ftl)
+ Lista de filtros (*.ftl)
+
+
+
+ Filter List (*.ftl)
+ Lista de filtros (*.ftl)
+
+
+
+
+ of
+ de
+
+
+
+ FrameSenderWindow
+
+
+
+ Frame Sender
+ Envio de Frame
+
+
+
+
+ Enable All
+ Ativar tudo
+
+
+
+
+ Disable All
+ Desativar tudo
+
+
+
+
+ Clear Grid
+ Limpar grade
+
+
+
+
+ Load to Grid
+ Carregar na grade
+
+
+
+
+ Save Grid
+ Salvar grade
+
+
+
+
+ Frame Sender Definition (*.fsd)
+ Definição do remetente do quadro (*.fsd)
+
+
+
+ FuzzingWindow
+
+
+
+ Fuzzing Window
+ Janela Difusão
+
+
+
+
+ Interframe Timing (ms)
+ Tempo entre frames (ms)
+
+
+
+
+ Number of data bytes
+ Número de bytes de dados
+
+
+
+
+ Burst Rate
+ Taxa de burst
+
+
+
+
+ Bus or Buses to Send On
+ Barramento ou Barramentos para enviar
+
+
+
+
+ ID Scanning
+ Digitalização de ID
+
+
+
+
+ Seqential
+ Sequencial
+
+
+
+
+
+
+ Random
+ Aleatório
+
+
+
+
+ ID Selection
+ Seleção de ID
+
+
+
+
+ Range of IDs
+ Faixa de IDs
+
+
+
+
+ Filter List
+ Lista de filtros
+
+
+
+
+ Bit Scanning
+ Varredura de bits
+
+
+
+
+ Sequential
+ Sequencial
+
+
+
+
+ Sweep
+ Varrer
+
+
+
+
+ IDs
+ IDs
+
+
+
+
+ Start ID:
+ ID inicial:
+
+
+
+
+ End ID:
+ ID final:
+
+
+
+
+
+ All
+ Todos
+
+
+
+
+ None
+ Nenhum
+
+
+
+
+ Byte Values (Always in hexadecimal)
+ Valores de bytes (sempre em hexadecimal)
+
+
+
+
+ 0
+ 0
+
+
+
+
+ 1
+ 1
+
+
+
+
+ 2
+ 2
+
+
+
+
+ 3
+ 3
+
+
+
+
+ 4
+ 4
+
+
+
+
+ 5
+ 5
+
+
+
+
+ 6
+ 6
+
+
+
+
+ 7
+ 7
+
+
+
+
+ 8
+ 8
+
+
+
+
+ 9
+ 9
+
+
+
+
+ 10
+ 10
+
+
+
+
+ 11
+ 11
+
+
+
+
+ 12
+ 12
+
+
+
+
+ 13
+ 13
+
+
+
+
+ 14
+ 14
+
+
+
+
+ 15
+ 15
+
+
+
+
+ White = Bit always 0, Green = Fuzz Bit, Black = Bit always set, Gray = Past end of data bytes
+ Branco = Bit sempre 0, Verde = Bit Difuso, Preto = Bit sempre definido, Cinza = Passado o fim dos bytes de dados
+
+
+
+
+ All High
+ Todos Alto
+
+
+
+
+ All Low
+ Todos Baixo
+
+
+
+
+ All Auto
+ Tudo Automático
+
+
+
+
+ Start Fuzzing
+ Comece a difusão
+
+
+
+
+ # of sent frames:
+ # de frames enviados:
+
+
+
+ GraphingWindow
+
+
+
+ Data Graphing
+ Gráficos de dados
+
+
+
+ Move to top left
+ Mover para o canto superior esquerdo
+
+
+
+ Move to top center
+ Mover para o centro superior
+
+
+
+ Move to top right
+ Mover para o canto superior direito
+
+
+
+ Move to bottom right
+ Mover para o canto inferior direito
+
+
+
+ Move to bottom left
+ Mover para o canto inferior esquerdo
+
+
+
+ Save graph image to file
+ Salvar imagem do gráfico em arquivo
+
+
+
+ Save graph definitions to file
+ Salvar definições de gráfico em arquivo
+
+
+
+ Load graph definitions from file
+ Carregar definições de gráfico do arquivo
+
+
+
+ Save spreadsheet of data
+ Salvar planilha de dados
+
+
+
+ Follow end of graph
+ Acompanhe o final do gráfico
+
+
+
+ Add new graph
+ Adicionar novo gráfico
+
+
+
+ Edit selected graph
+ Editar gráfico selecionado
+
+
+
+ Remove selected graph
+ Remover gráfico selecionado
+
+
+
+ Remove all graphs
+ Remover todos os gráficos
+
+
+
+ Reset View
+ Redefinir visualização
+
+
+
+ Rescale to data
+ Redimensionar para dados
+
+
+
+ Zoom In
+ Ampliar
+
+
+
+ Zoom Out
+ Diminuir zoom
+
+
+
+ PDF Files (*.pdf)
+ Arquivos PDF (*.pdf)
+
+
+
+ PNG Files (*.png)
+ Arquivos PNG (*.png)
+
+
+
+ JPEG Files (*.jpg)
+ Arquivos JPEG (*.jpg)
+
+
+
+ Spreadsheet (*.csv)
+ Planilha (*.csv)
+
+
+
+
+ Graph definition (*.gdf)
+ Definição de gráfico (*.gdf)
+
+
+
+ HelpWindow
+
+
+
+ SavvyCAN Help
+ Ajuda do SavvyCAN
+
+
+
+ ISOTP_InterpreterWindow
+
+
+
+ ISO-TP Decoder
+ Decodificador ISO-TP
+
+
+
+
+ Interpreted Messages Overview
+ Visão geral das mensagens interpretadas
+
+
+
+
+ Interpret Previously Captured Frames
+ Interpretar frames capturados anteriormente
+
+
+
+
+ Clear Messages List
+ Limpar lista de mensagens
+
+
+
+
+ Save List
+ Salvar lista
+
+
+
+
+ Show incomplete and/or corrupted messages
+ Mostrar mensagens incompletas e/ou corrompidas
+
+
+
+
+ Use extended addressing
+ Use endereçamento estendido
+
+
+
+
+ Data Details of Selected Message
+ Detalhes dos dados da mensagem selecionada
+
+
+
+
+ IDs to Decode
+ IDs para decodificar
+
+
+
+
+ All
+ Todos
+
+
+
+
+ None
+ Nenhum
+
+
+
+ Text File (*.txt)
+ Arquivo de texto (*.txt)
+
+
+
+ Raw Payload:
+ Raw Payload:
+
+
+
+ MainSettingsDialog
+
+
+
+ Main Settings
+ Configurações principais
+
+
+
+
+ Main Form Settings:
+ Configurações principais do formulário:
+
+
+
+
+ Autoscroll main frame window by default
+ Janela do quadro principal de rolagem automática por padrão
+
+
+
+
+ Maximum data bytes per line
+ Máximo de bytes de dados por linha
+
+
+
+
+ General Settings:
+ Configurações Gerais:
+
+
+
+
+ Save/Restore window positions and sizes
+ Salvar/restaurar posições e tamanhos de janelas
+
+
+
+
+ Save/Restore CAN bus connections
+ Salvar/restaurar conexões de barramento CAN
+
+
+
+
+ Display values as hexadecimal
+ Exibir valores como hexadecimal
+
+
+
+
+ Require validation of GVRET connection
+ Exigir validação da conexão GVRET
+
+
+
+
+ Use filtered frames in sub-windows
+ Use frames filtrados em subjanelas
+
+
+
+
+ OpenGL Accelerated AntiAliased Graphing
+ Gráficos AntiAliased acelerados por OpenGL
+
+
+
+
+ CAN Frame Pre-allocation Size
+ Tamanho de pré-alocação do frame CAN
+
+
+
+
+ Time Keeping
+ Cronometragem
+
+
+
+
+ Seconds/Milli/Micro are dongle based
+ Segundos/Milli/Micro são baseados em dongle
+
+
+
+
+ Seconds
+ Segundos
+
+
+
+
+ Microseconds
+ Microssegundos
+
+
+
+
+ Milliseconds
+ Milissegundos
+
+
+
+
+ System Clock
+ Relógio do sistema
+
+
+
+
+ Time Format String:
+ Sequência de formato de hora:
+
+
+
+
+ Use absolute time in decoded CSV output
+ Use tempo absoluto na saída CSV decodificada
+
+
+
+
+ Font
+ Fonte
+
+
+
+
+ Use fixed-width font in tables
+ Use fonte de largura fixa em tabelas
+
+
+
+
+ Size
+ Tamanho
+
+
+
+
+ Flowview Settings:
+ Configurações de visualização de fluxo:
+
+
+
+
+ Use timestamp mode by default
+ Use o modo timestamp por padrão
+
+
+
+
+ Set Auto Reference by default
+ Definir referência automática por padrão
+
+
+
+
+
+
+ Hexadecimal Graph Y Axis
+ Eixo Y do gráfico hexadecimal
+
+
+
+
+ Playback Window Settings:
+ Configurações da janela de reprodução:
+
+
+
+
+ Loop by default
+ Loop por padrão
+
+
+
+
+ Default playback speed (ms)
+ Velocidade de reprodução padrão (ms)
+
+
+
+
+ Default Sending Bus
+ Barramento de envio padrão
+
+
+
+
+ DBC Settings
+ Configurações DBC
+
+
+
+
+ Label DBC messages by default
+ Mostrar mensagens DBC por padrão
+
+
+
+
+ Ignore DBC message colors
+ Ignorar cores de mensagens DBC
+
+
+
+
+ File Info and Comparator Settings:
+ Informações do arquivo e configurações do comparador:
+
+
+
+
+ Auto expand all nodes
+ Expandir automaticamente todos os nós
+
+
+
+
+ MQTT Remote CAN Settings:
+ Configurações CAN remotas MQTT:
+
+
+
+
+ Host:
+ Host:
+
+
+
+
+ Port:
+ Porta:
+
+
+
+
+ User Name:
+ Nome de usuário:
+
+
+
+
+ Password
+ Senha:
+
+
+
+
+ Some settings will not take effect until the application is restarted
+ Algumas configurações não terão efeito até que o aplicativo seja reiniciado
+
+
+
+ None
+ Nenhum
+
+
+
+ 0
+ 0
+
+
+
+ 1
+ 1
+
+
+
+ All
+ Todos
+
+
+
+ From File
+ Do arquivo
+
+
+
+ MainWindow
+
+
+
+ SavvyCAN
+ SavvyCAN
+
+
+
+
+ Remote Connection Active:
+ Conexão remota ativa:
+
+
+
+
+ Total Frames Captured:
+ Total de frames capturados:
+
+
+
+
+ Frames Per Second:
+ Frames por segundo:
+
+
+
+
+ Suspend Capturing
+ Suspender captura
+
+
+
+
+ Normalize Frame Timing
+ Normalizar o tempo do frame
+
+
+
+
+ Clear Frames
+ Limpar Frames
+
+
+
+
+ Keep Filters When Clearing
+ Mantenha os filtros ao limpar
+
+
+
+
+ Auto Scroll Window
+ Janela de rolagem automática
+
+
+
+
+ Overwrite Mode
+ Modo de substituição
+
+
+
+
+ Interpret Frames
+ Interpretar frames
+
+
+
+
+ Expand All Rows
+ Expandir todas as linhas
+
+
+
+
+ Collapse All Rows
+ Recolher todas as linhas
+
+
+
+
+ Bus Filtering:
+ Filtragem de barramento:
+
+
+
+
+ Frame Filtering:
+ Filtragem de frames:
+
+
+
+
+ All
+ Todos
+
+
+
+
+ None
+ Nenhum
+
+
+
+
+ RE Tools
+ Ferramentas RE
+
+
+
+
+ Send Frames
+ Enviar frames
+
+
+
+
+ File
+ Arquivo
+
+
+
+
+ Connection
+ Conexão
+
+
+
+
+ Playback
+ Reprodução
+
+
+
+
+ Custom
+ Personalizado
+
+
+
+
+ Flow View
+ Visualização de fluxo
+
+
+
+
+ Fuzzy Scope
+ Escopo difuso
+
+
+
+
+ New Graphing Window
+ Nova janela gráfica
+
+
+
+
+ Load Log File
+ Carregar arquivo de log
+
+
+
+
+ Ctrl+O
+ Ctrl+O
+
+
+
+
+ Save Log File
+ Salvar arquivo de registro
+
+
+
+
+ Frame Data Analysis
+ Análise de dados de frames
+
+
+
+
+ Load DBC File
+ Carregar arquivo DBC
+
+
+
+
+ Edit Messages/Signals
+ Editar mensagens/sinais
+
+
+
+
+ Save DBC File
+ Salvar arquivo DBC
+
+
+
+
+ Save Decoded Frames
+ Salvar Frames decodificados
+
+
+
+
+ Exit Application
+ Sair do aplicativo
+
+
+
+
+ File Comparison
+ Comparação de arquivos
+
+
+
+
+ Preferences
+ Preferências
+
+
+
+
+ Save Filtered Log File
+ Salvar arquivo de log filtrado
+
+
+
+
+ Load Filter Definition
+ Definição de filtro de carga
+
+
+
+
+ Save Filter Definition
+ Salvar definição de filtro
+
+
+
+
+ Firmware Uploader
+ Carregador de firmware
+
+
+
+
+ Open Connection Window
+ Abrir janela de conexão
+
+
+
+
+ Connect
+ Conectar
+
+
+
+
+ Scripting Interface
+ Interface de script
+
+
+
+
+ Range State
+ Estado do intervalo
+
+
+
+
+ Single/Multi State
+ Estado único/múltiplo
+
+
+
+
+ DBC File Manager
+ Gerenciador de arquivos DBC
+
+
+
+
+ Fuzzing
+ Difusão
+
+
+
+
+ UDS Scanner
+ Scanner UDS
+
+
+
+
+ ISO-TP Decoder
+ Decodificador ISO-TP
+
+
+
+
+ Sniffer
+ Sniffer
+
+
+
+
+ Firmware Update
+ Atualização de Firmware
+
+
+
+
+ MotorControlConfig
+ MotorControlConfig
+
+
+
+
+ Capture Bisector
+ Capturar Bissetriz
+
+
+
+
+ Signal Viewer
+ Visualizador de sinal
+
+
+
+
+
+ Start Continuous Logging
+ Iniciar Log contínuo
+
+
+
+
+ Temporal Graph
+ Gráfico Temporal
+
+
+
+
+ DBC Comparison
+ Comparação DBC
+
+
+
+
+ Save Decoded Frames CSV
+ Salvar quadros decodificados CSV
+
+
+
+
+ CAN Bridge
+ Ponte CAN
+
+
+
+ Connected to 0 buses
+ Conectado a 0 barramentos
+
+
+
+ Press F1 on any screen for help
+ Pressione F1 em qualquer tela para obter ajuda
+
+
+
+ Add to a new graphing window
+ Adicionar a uma nova janela gráfica
+
+
+
+ Add to latest graphing window
+ Adicionar à janela gráfica mais recente
+
+
+
+ Cease Continuous Logging
+ Cessar Log contínuo
+
+
+
+ Filter list (*.ftl)
+ Lista de filtros (*.ftl)
+
+
+
+ Filter List (*.ftl)
+ Lista de filtros (*.ftl)
+
+
+
+ Text File (*.txt *.TXT)
+ Arquivo de texto (*.txt *.TXT)
+
+
+
+ CSV File (*.csv *.CSV)
+ Arquivo CSV (*.csv *.CSV)
+
+
+
+ Year
+ Ano
+
+
+
+ Month
+ Mês
+
+
+
+ Day
+ Dia
+
+
+
+ Hour
+ Hora
+
+
+
+ Minute
+ Minuto
+
+
+
+ Second
+ Segundo
+
+
+
+ Ms
+ EM
+
+
+
+ Time
+ Tempo
+
+
+
+ ID
+ ID
+
+
+
+ Bus
+ Barramento
+
+
+
+ DataLen
+ DataLen
+
+
+
+ Time:
+ Time:
+
+
+
+ ID:
+ ID:
+
+
+
+ Ext
+ Ext
+
+
+
+ Std
+ Std
+
+
+
+ Bus:
+ Bus:
+
+
+
+ Data Bytes:
+ Data Bytes:
+
+
+
+ Connected to
+ Conectado a
+
+
+
+ buses
+ barramentos
+
+
+
+ No packets loaded
+ Nenhum pacote carregado
+
+
+
+ No file loaded
+ Nenhum arquivo carregado
+
+
+
+ MotorControllerConfigWindow
+
+
+
+ Controller Configuration
+ Configuração do controlador
+
+
+
+
+ Load Definition File
+ Carregar arquivo de definição
+
+
+
+
+ Refresh
+ Atualizar
+
+
+
+
+ Save
+ Salvar
+
+
+
+ RMS Definition File (*.txt *.TXT)
+ Arquivo de definição RMS (*.txt *.TXT)
+
+
+
+ NewConnectionDialog
+
+
+
+ New Connection
+ Nova conexão
+
+
+
+
+ Connection Type
+ Tipo de conexão
+
+
+
+
+ socketcand (SocketCAN over Ethernet)
+ socketcand (SocketCAN sobre Ethernet)
+
+
+
+
+ QT SerialBus Devices (SocketCAN, PeakCAN, etc)
+ Dispositivos QT SerialBus (SocketCAN, PeakCAN, etc.)
+
+
+
+
+ MQTT Connection
+ Conexão MQTT
+
+
+
+
+ Serial Connection (GVRET)
+ Conexão serial (GVRET)
+
+
+
+
+ Network connection (GVRET)
+ Conexão de rede (GVRET)
+
+
+
+
+ LAWICEL / SLCAN Serial
+ LAWICEL/SLCAN Serial
+
+
+
+
+ CANserver
+ CANserver
+
+
+
+
+ CANlogserver
+ CANlogserver
+
+
+
+
+ SerialBus Device Type:
+ Tipo de dispositivo SerialBus:
+
+
+
+
+ Serial Port:
+ Porta serial:
+
+
+
+
+ Serial Port Speed:
+ Velocidade da porta serial:
+
+
+
+
+ CAN Bus Speed:
+ Velocidade do barramento CAN:
+
+
+
+
+ CAN-FD
+ CAN-FD
+
+
+
+
+ CAN-FD data rate
+ Taxa de dados CAN-FD
+
+
+
+
+ Create New Connection
+ Criar nova conexão
+
+
+
+ NewGraphDialog
+
+
+
+ Graph Settings
+ Configurações de gráfico
+
+
+
+
+ <html><head/><body><p>Name:</p></body></html>
+ <html><head/><body><p>Nome:</p></body></html>
+
+
+
+
+ ID:
+ ID:
+
+
+
+
+ Start Bit:
+ Bit inicial:
+
+
+
+
+ Graph a DBC Signal:
+ Representar graficamente um sinal DBC:
+
+
+
+
+ Node:
+ Nó:
+
+
+
+
+ Message:
+ Mensagem:
+
+
+
+
+ Signal:
+ Sinal:
+
+
+
+
+ Copy Signal Parameters
+ Copiar parâmetros de sinal
+
+
+
+
+ Bit Len:
+ Largura do Bit:
+
+
+
+
+ Little Endian
+ Little Endian
+
+
+
+
+ (LSB First)
+ (LSB Primeiro)
+
+
+
+
+ Signed:
+ Signed:
+
+
+
+
+ Mask:
+ Máscara:
+
+
+
+
+ Bias:
+ Deslocamento:
+
+
+
+
+ Scale
+ Escala
+
+
+
+
+ Stride
+ Passo
+
+
+
+
+ Associated Bus
+ Barramento Associado
+
+
+
+
+ -1
+ -1
+
+
+
+
+ Only Points
+ Apenas pontos
+
+
+
+
+ Point Style
+ Estilo de ponto
+
+
+
+
+ Line Thickness
+ Espessura da linha
+
+
+
+
+ Line Color
+ Cor da linha
+
+
+
+
+
+
+ CHANGE
+ MUDAR
+
+
+
+
+ Fill Color
+ Cor de preenchimento
+
+
+
+
+ Add this graph
+ Adicione este gráfico
+
+
+
+ QObject
+
+
+ The %1 part contains more than one '-' sign
+ A parte %1 contém mais de um sinal '-'
+
+
+
+
+
+ Unable to parse the %1 part to integer
+ Não foi possível analisar a parte %1 em número inteiro
+
+
+
+ RangeStateWindow
+
+
+
+ Range State Window
+ Janela de estado de intervalo
+
+
+
+
+ Candidate Signals:
+ Sinais de Candidato:
+
+
+
+
+ Graphical Representation of Selected Signal:
+ Representação gráfica do sinal selecionado:
+
+
+
+
+ Sensitivity
+ Sensibilidade
+
+
+
+
+ Min Signal Size:
+ Tamanho mínimo do sinal:
+
+
+
+
+ Max Signal Size:
+ Tamanho máximo do sinal:
+
+
+
+
+ Granularity:
+ Granularidade:
+
+
+
+
+ Signal Mode:
+ Modo de sinal:
+
+
+
+
+ Signed Mode:
+ Modo Signed:
+
+
+
+
+ ID Filter:
+ Filtro de ID:
+
+
+
+
+ All
+ Todos
+
+
+
+
+ None
+ Nenhum
+
+
+
+
+ Recalculate Candidate Signals
+ Recalcular Sinais Candidatos
+
+
+
+ Big Endian
+ Big Endian
+
+
+
+ Little Endian
+ Little Endian
+
+
+
+
+ Try Both
+ Experimentar ambos
+
+
+
+ Signed Value
+ Valor Signed
+
+
+
+ Unsigned Value
+ Valor Unsigned
+
+
+
+ ScriptingWindow
+
+
+
+ Scripting Interface
+ Interface de script
+
+
+
+
+ Public Variables
+ Variáveis Públicas
+
+
+
+
+ Loaded Scripts
+ Scripts carregados
+
+
+
+
+ &New
+ &Novo
+
+
+
+
+ &Del
+ &Excluir
+
+
+
+
+ &Load
+ &Carregar
+
+
+
+
+ Script Editing Window
+ Janela de edição de script
+
+
+
+
+ &Save
+ &Salvar
+
+
+
+
+ Sa&ve As
+ Sal&var como
+
+
+
+
+ &Revert
+ &Reverter
+
+
+
+
+ R&eload
+ R&ecarregar
+
+
+
+
+ Re&compile
+ Re&compilar
+
+
+
+
+ Log Window
+ Janela de Log
+
+
+
+
+ &Auto Scroll Log Window
+ &Janela de registro de rolagem automática
+
+
+
+
+ Clear Log &Window
+ &Limpar Log e janela
+
+
+
+
+ Save L&og
+ Salvar L&og
+
+
+
+
+ Javascript File (*.js)
+ Arquivo Javascript (*.js)
+
+
+
+ Log File (*.log)
+ Arquivo de registro (*.log)
+
+
+
+ SignalViewerWindow
+
+
+
+ Signal Viewer
+ Visualizador de sinal
+
+
+
+
+ Remove Selected Signal
+ Remover sinal selecionado
+
+
+
+
+ Node
+ Nó
+
+
+
+
+ Message
+ Mensagem
+
+
+
+
+ Signal
+ Sinal
+
+
+
+
+ Add To Viewer
+ Adicionar ao visualizador
+
+
+
+
+ Save View
+ Salvar visualização
+
+
+
+
+ Load View
+ Carregar visualização
+
+
+
+
+ Append to View
+ Anexar à visualização
+
+
+
+
+ Clear View
+ Limpar Visão
+
+
+
+
+ SignalViewer definition (*.sdf)
+ Definição do SignalViewer (*.sdf)
+
+
+
+ TemporalGraphWindow
+
+
+
+ Temporal Graph
+ Gráfico Temporal
+
+
+
+ TriggerDialog
+
+
+
+ Trigger Builder
+ Construtor de Triggers
+
+
+
+
+ Add New
+ Adicionar novo
+
+
+
+
+ Delete
+ Excluir
+
+
+
+
+ Bus
+ Barramento
+
+
+
+
+ Msg ID
+ ID da mensagem
+
+
+
+
+ Signal
+ Signed
+
+
+
+
+ MS Delay
+ Atraso MS
+
+
+
+
+ Max Count
+ Contagem máxima
+
+
+
+
+ Signal Value
+ Valor do sinal
+
+
+
+
+ Save And Update
+ Salvar e atualizar
+
+
+
+ UDSScanWindow
+
+
+
+ UDS Scanner
+ Scanner UDS
+
+
+
+
+ Scans To Run
+ Varreduras para executar
+
+
+
+
+ Add
+ Adicionar
+
+
+
+
+ Delete
+ Excluir
+
+
+
+
+ Load
+ Carregar
+
+
+
+
+ Save
+ Salvar
+
+
+
+
+ Starting ID
+ ID inicial
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ 0x
+ 0x
+
+
+
+
+ Ending ID
+ ID final
+
+
+
+
+ Show "No Reply"
+ Mostrar "Sem resposta"
+
+
+
+
+ Allow adaptive reply offset
+ Permitir deslocamento de resposta adaptável
+
+
+
+
+ Bus to scan
+ Barramento para escanear
+
+
+
+
+ Maximum reply delay (ms)
+ Atraso máximo de resposta (ms)
+
+
+
+
+ Reply Offset:
+ Compensação de resposta:
+
+
+
+
+ Scan Type:
+ Tipo de varredura:
+
+
+
+
+ Run test in session type:
+ Execute o teste no tipo de sessão:
+
+
+
+
+ Subfunct Len:
+ Len subfunção:
+
+
+
+
+ Lower Bound:
+ Limite inferior:
+
+
+
+
+ Upper Bound:
+ Limite superior:
+
+
+
+
+ Increment
+ Incremento
+
+
+
+
+ Lower Service:
+ Serviço inferior:
+
+
+
+
+ Upper Service:
+ Serviço Superior:
+
+
+
+
+ Results
+ Resultados
+
+
+
+
+ Run All Scans
+ Execute todas as varreduras
+
+
+
+
+ Run Selected Scan
+ Executar varredura selecionada
+
+
+
+
+ Save Scan Results
+ Salvar resultados da varredura
+
+
+
+
+ UDS Test Specification (*.uds *.UDS)
+ Especificação de teste UDS (*.uds *.UDS)
+
+
+
+ Text File (*.txt)
+ Arquivo de texto (*.txt)
+
+
+
+ snifferWindow
+
+
+
+ Sniffer
+ Sniffer
+
+
+
+
+ Notch
+ Encaixar
+
+
+
+
+ Unnotch
+ Desencaixar
+
+
+
+
+ Mute notched bits
+ Silenciar bits enganchados
+
+
+
+
+ Notch Interval
+ Intervalo de encaixe
+
+
+
+
+
+
+ ms
+ ms
+
+
+
+
+ Expire Interval
+ Intervalo de expiração
+
+
+
+
+ Never Expire IDs
+ Nunca expire IDs
+
+
+
+
+ Fade inactive bytes
+ Desaparecer bytes inativos
+
+
+
+
+ View Bits
+ Ver bits
+
+
+
+
+ Filters:
+ Filtros:
+
+
+
+
+ All
+ Todos
+
+
+
+
+ None
+ Nenhum
+
+
+