t.mettler/giesCANne
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

A large update to the help files. The reference pictures have been

Browse Source 
updated and several of the help files have been updated. This process
is not done yet.
This commit is contained in:
Collin Kidder
2021-08-19 21:30:54 -04:00
parent d8f2c2d0e3
commit 20f7217ad3
30 changed files with 143 additions and 98 deletions
Download Patch File Download Diff File Expand all files Collapse all files
help/fuzzingwindow.md
+1 -1
View File
@@ -17,7 +17,7 @@ You have now been warned. Sending random garbage over the CAN bus to see what ha
Controlling the Fuzzy Beast
===========================
So, you want to give it a try? Let's do it! First of all, you can set the delay between frames and the burst rate. The delay is in milliseconds but can be set as low as 0. If the delay is set to 0 then the system will attempt to send frames as fast as it can. However, even then you may not get quite as many frames per second as you'd like. Even at 0 it will still be scheduled by your operating system and so might not quite get to the speed you want. The burst rate can cause the program to send one than one frame each interval. This is useful as a CAN bus could potentially support 2000 to 8000 frames per second. If you need rapid frame sending your best bet is to set the sending interval to 1-2ms and then adjust the burst
So, you want to give it a try? Let's do it! First of all, you can set the delay between frames and the burst rate. The delay is in milliseconds but can be set as low as 0. If the delay is set to 0 then the system will attempt to send frames as fast as it can. However, even then you may not get quite as many frames per second as you'd like. Even at 0 it will still be scheduled by your operating system and so might not quite get to the speed you want. The burst rate can cause the program to send more than one frame each interval. This is useful as a CAN bus could potentially support 2000 to 8000 frames per second. If you need rapid frame sending your best bet is to set the sending interval to 1-2ms and then adjust the burst
rate until you get your desired sending rate. Then you can set the number of bytes to send. Ordinarily this would be the full 8 but you can experiment with smaller frames. You can set to send on a specific bus. That's all the simple settings. It gets a bit more complicated now.
The "ID Scanning" box has two radio buttons: